Eaton

EASY-E4-UC-12RC1

Nano Programmable Logic Controller

Eaton

EASY-E4-UC-12RC1

Nano Programmable Logic Controller

Eaton

EASY-E4-UC-12RC1

Nano Programmable Logic Controller

6 Basic Devices
8 Expansion Packs Available
Available With or Without Displays
DIN Rail Mounted
Connectable to Ethernet and BUS Systems

6 Base Models Available With or Without Display

Call for Quick Order

Quick Chat

Description:

Electronic control relay easy-E4 with supply voltage 12 VDC, 24 VDC or 24 VAC. 8 digital inputs with 12VDC, 24VDC or 24VAC are available, of which 4 inputs can also be used as analog inputs and 4 inputs as fast counter. The control relay easy-E4 has 4 relay outputs for 12 - 250VAC or 12 - 240VDC. The control relay is equipped with a display, a clock, an integrated Ethernet interface and screw terminals. This control relay easy-E4 can be extended with the digital input/output extensions of the easyE4 series.

EASY-E4-UC-12RC1

Technical Specifications

Main Specifications

Description	EASY-E4-UC-12RC1 Base Unit
Digital Inputs	8
Can Be Used as Analog Inputs	4
Quantity of outputs	Relay: 4
Real time clock	Included
Display & keypad	Included
Expansions	Expandable networkable (Ethernet)
Supply voltage	12/24 V DC 24 V AC
Software	EASYSOFT-SWLIC/easySoft 7
Connection type	screw terminal

Standards	EN 61000-6-2 EN 61000-6-3 IEC 60068-2-6 IEC 60068-2-27 IEC 60068-2-30 IEC/EN 61131-2 EN 61010 EN 50178
Approvals Approvals	cULus
Approvals certificate	CE
Approvals shipping classification	DNV GL
Approvals
Dimensions (W x H x D)	71.5 x 90 x 58 mm
Weight	0.215 kg
Mounting	Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories)
Connection type	screw terminal
Ethernet Connections	RJ45 plug, 8-pin
Ethernet Cable	CAT5

Description	EASY-E4-UC-12RC1 Base Unit
Screw terminals Solid	0.2 - 4 mm²
Screw terminals flexible	0.2 - 2.5 mm²
Screw terminals Solid or flexible conductor, with ferrule	0,2 - 2,5 mm²
Screw terminals Solid or stranded	22 - 12 AWG
Screw terminals Standard screwdriver	0.8 x 3.5 mm
Screw terminals Tightening torque	0.5 - 0.7 Nm
Screw terminals Stripping length	6.5 mm

Description	EASY-E4-UC-12RC1 Base Unit
Display - Type	Monochrome
Lines x characters	6 x 16

Description	EASY-E4-UC-12RC1 Base Unit
Operating ambient temperature	-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C
Condensation	Take appropriate measures to prevent condensation
LCD display (clearly legible)	0 - 55 °C
Storage [ϑ]	-40 - +70 °C
relative humidity	in accordance with IEC 60068-2-30, IEC 60068-2-78 5 - 95 %
Air pressure (operation)	795 - 1080 hPa

Description	EASY-E4-UC-12RC1 Base Unit
Protection type (IEC/EN 60529, EN50178, VBG 4)	IP20
Vibrations	In accordance with IEC 60068-2-6 constant amplitude 0.15 mm: 10 - 57 constant acceleration 2 g: 57 - 150 Hz
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms	18 Impacts
Drop to IEC/EN 60068-2-31 [Drop height]	50 mm
Free fall, packaged (IEC/EN 60068-2-32)	0.3 m
Mounting position	Vertical or horizontal

Description	EASY-E4-UC-12RC1 Base Unit
Overvoltage category/pollution degree	III/2
Electrostatic discharge (ESD) applied standard	nach IEC/EN 61000-4-2
Electrostatic discharge (ESD) Air discharge	8 kV
Electrostatic discharge (ESD) Contact discharge	6 kV
Electromagnetic fields (RFI) to IEC EN 61000-4-3	0.08 - 1.0 GHz: 10 1.4 - 2 GHz: 3 2.0 - 2.7 GHz: 1 V/m
Radio interference suppression	EN 61000-6-3 Class B
Burst	according to IEC/EN 61000-4-4 Supply cables: 2 Signal cables: 2 kV
power pulses (Surge)	according to IEC/EN 61000-4-5 1 kV (supply cables, symmetrical) 2 kV (supply cables, asymmetrical)
Immunity to line-conducted interference to (IEC/EN 61000-4-6)	10 V

Description	EASY-E4-UC-12RC1 Base Unit
Clearance in air and creepage distances	nach EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201
Insulation resistance	per EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201

Description	EASY-E4-UC-12RC1 Base Unit
Back-up of real-time clock
	① Backup time (hours) with fully charged double layer capacitor ② Service life (years)
Accuracy of the real-time clock	typ. ± 2 (± 0.2 h⁄Year) s/day
	depending on ambient air temperature fluctuations of up to ± 5 s/day (± 0.5 h⁄year) are possible

Description	EASY-E4-UC-12RC1 Base Unit
Accuracy of timing relays (of values)	± 0.02 %
Resolution Range “S”	5 ms
Resolution Range “M:S”	1 s
Resolution Range “H:M”	1 min

Description	EASY-E4-UC-12RC1 Base Unit
Rated operational voltage [U_e]	12/24 DC (-15/+20%) 24 AC (-15/+10%) V
Permissible range [U_e]	10.2 - 28.8 V DC 20.4 - 26.4 V AC
Residual ripple	≦ 5 %
Protection against polarity reversal	yes
Frequency	50/60 (± 5%) Hz
Input current	max. 200 mA at 12 V DC max. 125 mA at 24 V DC
Voltage dips	≤ 20 ms at 24 V AC 10 ms at 24 V DC 1 ms at 12 V DC ms
Fuse	≧ 1A (T) A
Power loss [P]	Normally 3 W
Heat dissipation at 24 V DC	3 W

Description	EASY-E4-UC-12RC1 Base Unit
Number	8
Status Display	LCD-Display
Potential isolation	from power supply: no to the memory card: no to Ethernet: yes between inputs: no from the outputs: yes to expansion devices: yes
Rated operational voltage [U_e]	12 V DC
Input voltage	Condition 0: ≦ 5 (I1 - I8) Condition 1: ≧ 8 (I1 - I8) V DC
Input current at signal 1	1.75 mA (I1 - I4) 0.9 mA (I5 - I8) mA
Deceleration time	20 (0 -> 1/1 -> 0, Debounce ON) type 0.015 (0 -> 1/1 -> 0, Debounce OFF) ms
Cable length	100 (unshielded) m
Frequency counter Note	Notes on this, see under Digital inputs 24 V DC
Incremental counter Note	Notes on this, see under Digital inputs 24 V DC
Rapid counter inputs Note	Notes on this, see under Digital inputs 24 V DC

Description	EASY-E4-UC-12RC1 Base Unit
Number	8
Inputs can be used as analog inputs	4 (I5, I6, I7, I8)
Status Display	LCD-Display
Potential isolation	from power supply: no to the memory card: no to Ethernet: yes between inputs: no from the outputs: yes to expansion devices: yes
Rated operational voltage [U_e]	24 V DC
Input voltage	Signal 0: ≦ 5 (I1 - I8) Condition 1: ≧ 15 (I1 - I8) V DC
Input current at signal 1	3.3 (I1 – I4) 1.8 (I5 – I8) mA
Deceleration time	20 (0 -> 1/1 -> 0, Debounce ON) type 0.015 (0 -> 1/1 -> 0, Debounce OFF) ms
Cable length	100 (unshielded) m
Frequency counter Number	4 (I1, I2, I3, I4)
Frequency counter Counter frequency	≦ 5 kHz
Frequency counter Pulse shape	Square
Frequency counter Pulse pause ratio	1:1
Frequency counter Cable length	≦ 20 (screened) m
Incremental counter Number of counter inputs	2 (I1 + I2, I3 + I4)
Incremental counter Value range	-2147483648 to +2147483647
Incremental counter Counter frequency	≦ 5 kHz
Incremental counter Pulse shape	Square
Incremental counter Signal offset	90°
Incremental counter Pulse pause ratio	1:1
Incremental counter Cable length	≦ 20 (screened) m
Rapid counter inputs Number	4 (I1, I2, I3, I4)
Rapid counter inputs Value range	-2147483648 to +2147483647
Rapid counter inputs Counter frequency	≦ 10 kHz
Rapid counter inputs Pulse shape	Square
Rapid counter inputs Pulse pause ratio	1:1
Rapid counter inputs Cable length	≦ 20 (screened) m

Description	EASY-E4-UC-12RC1 Base Unit
Number	8
Status Display	LCD-Display
Potential isolation	from power supply: no to the memory card: no to Ethernet: yes between inputs: no from the outputs: yes to expansion devices: yes
Rated operational voltage [U_e]	24 V AC
Input voltage (AC = sinusoidal) [U_e]	Status 0: ≦ 5 (I1 - I8) Condition 1: ≧ 14 (I1 - I8) V
Rated frequency	50/60 Hz
Input current at signal 1	I1 - I4: 3.5 (at 24 VAC/DC) I5 - I8: 1.8 (at 24 VAC/DC) mA
Deceleration time	45/38 (0 -> 1/1 -> 0, debounce ON 50/60Hz) type 25⁄21 (0 - > 1/1 -> 0, debounce OFF 50/60Hz) ms
Cable length	40 (unshielded) m

Description	EASY-E4-UC-12RC1 Base Unit
Number	4 (I5, I6, I7, I8)
Potential isolation	from power supply: no to the memory card: no to Ethernet: yes between inputs: no from the outputs: yes to expansion devices: yes
Input type	DC voltage
Signal range	0-10 V DC
Resolution	12 Bit (value 0 - 4095)
Input impedance	13.3 kΩ
Accuracy of actual value two devices from series	± 3 , ± 0.12 V %
Accuracy of actual value Within a single device	± 2, ± 0.12 V %
Conversion time, analog/digital	each CPU cycle ms
Input current	< 1 mA
Cable length	≦ 30, screened m

Description	EASY-E4-UC-12RC1 Base Unit
Number	4
Outputs in groups of	1
Parallel switching of outputs for increased output	Not allowed
Protection of an output relay	Miniature circuit-breaker B16 or slow-blow 8 A fuse
Potential isolation	Safe isolation according to EN 50178: 300 V AC Basic isolation: 600 V AC from power supply: yes From the inputs: yes between outputs: yes to Ethernet: yes to expansion devices: yes
Contacts Conventional thermal current (10 A UL)	8 A
Contacts Recommended for load: 12 V AC/DC	> 500 mA
Contacts Rated impulse withstand voltage U_imp of contact coil	6 kV
Contacts Rated operational voltage [U_e]	240 V AC
Rated insulation voltage [U_i]	240 V AC
Safe isolation according to EN 50178	300 between coil and contact 300 between two contacts V AC
Making capacity AC–-15, 250 V AC, 3 A (600 ops./h) [Operations]	300000
Making capacity DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]	200000
Breaking capacity AC-15, 250 V AC, 3 A (600 Ops./h) [Operations]	300000
Breaking capacity DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]	200000
Filament bulb load 1000 W at 230/240 V AC [Operations]	25000
Filament bulb load 500 W at 115/120 V AC [Operations]	25000
Fluorescent lamp load Fluorescent lamp load 10 x 58 W at 230/240 V AC With upstream electrical device [Operations]	25000
Fluorescent lamp load Fluorescent lamp load 10 x 58 W at 230/240 V AC Uncompensated [Operations]	25000
Fluorescent lamp load Fluorescent lamp load 1 x 58 W at 230/240 V AC, conventional, compensated [Operations]	25000
Switching frequency Mechanical operations	10 x 10⁶
Switching frequency Switching frequency	10 Hz
Switching frequency Resistive load/lamp load	2 Hz
Switching frequency Inductive load	0.5 Hz
UL/CSA Uninterrupted current at 240 V AC	10 A
UL/CSA Uninterrupted current at 24 V DC	8 A
UL/CSA AC Control Circuit Rating Codes (utilization category)	B 300 Light Pilot Duty
UL/CSA AC Max. rated operational voltage	300 V AC
UL/CSA AC max. thermal continuous current cos ϕ = 1 at B 300	5 A
UL/CSA AC max. make/break cos ϕ ≠ capacity 1 at B 300	3600/360 VA
UL/CSA DC Control Circuit Rating Codes (utilization category)	R 300 Light Pilot Duty
UL/CSA DC Max. rated operational voltage	300 V DC
UL/CSA DC Max. thermal uninterrupted current at R 300	1 A
UL/CSA DC Max. make/break capacity at R 300	28/28 VA

Description	EASY-E4-UC-12RC1 Base Unit
Data transfer rate	10/100 Mbit/s
Connections	RJ45 plug, 8-pin
Cable	CAT5

Description	EASY-E4-UC-12RC1 Base Unit
Static heat dissipation, non-current-dependent [P_vs]	3 W
Operating ambient temperature min.	-25 °C
Operating ambient temperature max.	+55 °C

Description	EASY-E4-UC-12RC1 Base Unit
10.2 Strength of materials and parts 10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2 Strength of materials and parts 10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2 Strength of materials and parts 10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2 Strength of materials and parts 10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard's requirements.
10.2 Strength of materials and parts 10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2 Strength of materials and parts 10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts 10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts 10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard's requirements.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9 Insulation properties 10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9 Insulation properties 10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9 Insulation properties 10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Description	EASY-E4-UC-12RC1 Base Unit


Supply voltage AC 50 Hz	20.4 - 28.8 V
Supply voltage AC 60 Hz	20.4 - 28.8 V
Supply voltage DC	10.2 - 28.8 V
Voltage type of supply voltage	AC/DC
Switching current	8 A
Number of analogue inputs	4
Number of analogue outputs	0
Number of digital inputs	8
Number of digital outputs	4
With relay output	Yes
Number of HW-interfaces industrial Ethernet	1
Number of interfaces PROFINET	0
Number of HW-interfaces RS-232	0
Number of HW-interfaces RS-422	0
Number of HW-interfaces RS-485	0
Number of HW-interfaces serial TTY	0
Number of HW-interfaces USB	0
Number of HW-interfaces parallel	0
Number of HW-interfaces Wireless	0
Number of HW-interfaces other	1
With optical interface	No
Supporting protocol for TCP/IP	Yes
Supporting protocol for PROFIBUS	No
Supporting protocol for CAN	No
Supporting protocol for INTERBUS	No
Supporting protocol for ASI	No
Supporting protocol for KNX	No
Supporting protocol for MODBUS	Yes
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
Redundancy	No
With display	Yes
Degree of protection (IP)	IP20
Basic device	Yes
Expandable	Yes
Expansion device	No
With timer	Yes
Rail mounting possible	Yes
Wall mounting/direct mounting	Yes
Front build in possible	Yes
Rack-assembly possible	No
Suitable for safety functions	No
Category according to EN 954-1	None
SIL according to IEC 61508	None
Performance level acc. EN ISO 13849-1	None
Appendant operation agent (Ex ia)	No
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	None
Explosion safety category for dust	None
Width	71.5 mm
Height	90 mm
Depth	58 mm