Moeller PKZM0 Accessories |
CURRENT LIMITERS |
§ Used to increase the short circuit current ratings of PKZM0-10 and PKZM0-16 to 50 kA @ 600 V AC and PKZM0-20 and PKZM0-25 to 8 kA @ 600 V AC § Mounts below or next to PKZM0 motor protector. |
| CL-PKZ0 |
SUPPRESSORS AND AUXILIARY CONTACTS |
|
Type Article Number |
Voltage |
| PKZ0 | AC |
RC Suppressors For use with S(E)00-...-PKZ0(...) DC rated contactor coils are supplied standard with built in surge suppressors |
|
| 24 - 48 V AC | |
| 110-250 V AC | |
Varistor Suppressors For use with S(E)00-...-PKZ0(...) DC rated contactor coils are supplied standard with built in surge suppressors |
|
| 24 - 48 V AC | |
| 110-250 V AC | |
| 380 - 415 V AC | |
Base for separate mounting SE00 and S00 contactors can be individually or separately mounted using the EZ-PKZ0 mounting base. The base can also be mounted on DIN rail (on rails of 7.5 mm or 15 mm heights) |
|
For use with S(E)00-PKZ0(...) HI11-S/EZ-PKZ0 |
|
Mechanical Interlock Used to mechanically interlock two S(E)00 contactors, e.g. to build reversing started combinations. |
|
For use with S(E)00-PKZ0(...) |
|
Auxiliary Contact Module Cannot be combined with: PKZM0-.../S(E)00 equipped with the NHI-...-PKZ0 and/or AGM-...-PKZ0. |
|
For use with S(E)00-PKZ0(...) |
|
INSULATED ENCLOSURES |
|||
Type Article Number |
Description | Degree of Protection | For use with |
For Motor Protectors Includes ground terminal connection, smooth sided base with drill starts |
|||
| Cover with opening dimensioned to accommodate front of motor protector | IP 40 UL/NEMA/CSA 1 | PKZM0-... +NHI or AGM +U or A +NHI-E +L-PKZ0 (2 pieces) |
|
|
|
with black/grey handle | IP 55 UL/NEMA/CSA 12, 3R | PKZM0-... +NHI or AGM +U or A +NHI-E +L-PKZ0 (2 pieces) |
|
|
with red/yellow handle for use in emergency stop circuits to VDE 0113 | IP 55 UL/NEMA/CSA 12, 3R | PKZM0-... +NHI or AGM +U or A +NHI-E +L-PKZ0 (2 pieces) |
| For Motor protector with early make contacts | |||
|
|
With black/grey handle (Includes ground terminal connection, smooth sided base with drill starts) |
IP 55 UL/NEMA/CSA 12, 3R | PKZM0-... +NHI or AGM +U or A +NHI-E +L-PKZ0 (2 pieces) |
With red/yellow handler for use in emergency stop circuits to VDE 0113
(Includes ground terminal connection, smooth sided base with drill starts) |
IP 55 UL/NEMA/CSA 12, 3R | PKZM0-... +NHI or AGM +U or A +NHI-E +L-PKZ0 (2 pieces) |
|
|
|
Padlocking assembly accommodating up to 3 padlocks with a hasp thickness of 3-6 mm for use on main switched to IEC/EN 60 204
(Padlockable on the OFF position of the PKZM0 manual motor protector) |
CI-PKZ0-G(R)(V) |
|
| For Motor protector combinations | |||
|
|
Door coupling handle (R)H-PKZ0 (IP 65, UL/NEMA/CSA 12)
Mounting depth 125 mm, additional M3-CI23 mounting plate required |
IP 65 UL/NEMA/CSA 1, 12, 13, 4x indoor | PKZM0-.../S(E)00 +NHI or NHI...S +NHI-E +R(H) +L-PKZ0 (2 pieces)
|
|
|
Door coupling handle (R)H-PKZ0 (IP 65, UL/NEMA/CSA 12)
Mounting depth 150 mm, additional M3-CI23 mounting plate required |
IP 65 UL/NEMA/CSA 1, 12, 13, 4x indoor | PKZM0-.../S(E)00 +NHI or NHI...S +NHI-E +R(H) +L-PKZ0 (2 pieces) |
CLIP PLATES |
|
One of the clip plates is always necessary when combining a PKZM0 manual protector and a S(E)00 magnetic contactor to create a magnetic motor protector combination. Can be either panel mounted with screws or DIN rail mounted using one 15mm height rail or two 7.5mm height rails. DIN rails must conform to EN 50 022-35 |
|
Type Article Number |
Description |
| Standard Version | |
| Short Version | |
DOOR COUPLING HANDLESUL/NEMA 12, IP 65 |
|
Type Article Number |
Description |
|
|
For use
as main switch. Door/cover interlocked when switch is in
the ON position. Black Color
3 Positions: ON/OFF/+ (tripped). Lockable in the OFF position using 3 padlocks (hasp thickness 4-8 mm). Can also be modified to be lockable in the ON position. |
|
|
For use as main switch in MCC to VDE 0113, with PKZM0 turned 90 degrees Black Color
3 Positions: ON/OFF/+ (tripped). Lockable in the OFF position using 3 padlocks (hasp thickness 4-8 mm). Can also be modified to be lockable in the ON position. |
|
|
For use as main switch with Emergency stop function. Door/cover interlocking feature.
3 Positions: ON/OFF/+ (tripped). Lockable in the OFF position using 3 padlocks (hasp thickness 4-8 mm). |
|
|
For use as main switch in with Emergency stop in MCC to VDE 0113, with PKZM0 turned 90 degrees. Black Color 3 Positions: ON/OFF/+ (tripped). Lockable in the OFF position using 3 padlocks (hasp thickness 4-8 mm). |
|
|
Simpler mechanism without any door/cover interlocking or padlocking capability. Color: black, with On/Off and “+” (Tripped) switch position. |
| A-H-PKZ0 | Plug in extension shaft. Supplied with all door coupling handles. The extension shaft can be cut to any required length to accommodate mounting depths 100-240 mm. |
ENCLOSURE ACCESSORIESUL/NEMA 12, IP 65 |
|
Type Article Number |
Description |
Padlockable Knob Handle Accommodates 1/4" (3-3.35mm) padlocks. |
|
Replaced standard PKZM0 knob handle with a padlockable version. Padlockable in the OFF position. |
|
Tamper-Sealing Cover Uses conventional lead seal |
|
To prevent unauthorized access to the motor FLC thermal trip dial setting and the test-to-trip function. |
|
Indicating Lights with Neon Bulbs |
|
White 110 - 230 V |
|
White 230 - 400 V |
|
White 415 - 500 V |
|
Green 110 - 230 V |
|
Green 230 - 400 V |
|
Red 110 - 230 V |
|
Red 230 - 400 V |
|
Red 415 - 500 V |
|
BUS CONNECTORS |
|||
Three-Phase Feeder Bus Connectors Finger safe. Reduces mounting space and wiring time by eliminating daisy-chain wiring; can be joined to accommodate more units. |
|||
Type Article Number |
# Motor protectors | Length | Unit width avail per motor protector |
| For motor protector and motor protector combinations without side mounted auxiliary contacts or voltage trips. | |||
| 2 | 90 | 45 | |
| 4 | 180 | 45 | |
| For motor protector and motor protector combinations each with one side mounted auxiliary contact or trip indicating contact module, mounted on the right. | |||
| 2 | 99 | 45 + 9 | |
| 3 | 153 | 45 + 9 | |
| 4 | 207 | 45 + 9 | |
| 5 | 261 | 45 + 9 | |
| For motor protector and motor protector combinations each having one auxiliary contact and trip indicating auxiliary contact module, mounted on the right, or a voltage trip mounted on the left, or for motor protector combinations having a long NHI2-11S-PKZ0 standard auxiliary contact mounted on the right. | |||
| 2 | 108 | 45 + 18 | |
| 4 | 234 | 45 + 18 | |
| Protective Shroud for Unused Terminals | |||
| Finger safe covers which slip over unused terminals of a three-phase feeder bus connector to protect against accidental contact | |||
| Connector Feeder Terminal | |||
| Incoming supply terminal to fee bus
connectors, finger-safe design, maximum ampacity: 63 A
Permissible conductor range: AWG 10...4, Cu only |
|||
| Connector with UL 489 distribution spacings on the incoming supply terminals. To be used in conjunction with PKZM0 motor protectors for UL listing as Type E manual self-protected combination controller. | |||
CONTROL
PANEL BUS ADAPTER, |
||||
The back of the adapter connects onto the bus. Components are mounted on top of the adapter and wires to the supply leads. All assembly is done under de-energized (Power Off) conditions |
||||
Type Article Number |
Maximum Rated Current | Adapter Supply Leads | Adapter Width | For Use With |
| PKZ0 | Amps | AWG | mm | |
For mounting in industrial control panels on CU 20 x 5 mm busbar arrangements with 60 mm phase separation. |
||||
| 25 | 10 | 54 | PKZM 0-... or PKZM 0-.../S(E)00 + AGM or NHI |
|
| 25 | 10 | 108 | 2 x PKZM 0-... or 2 x PKZM 0-.../S(E)00 +AGM or NHI, or 1 x PKZM 0-... +2 x EZ-PK Z0 + MV-PKZ 0 |
|
| 25 | 10 | 144 | 2 x PKZM 0-... or 2 x PKZM 0-.../S(E)00 +AGM or NHI, or 1 x PKZM 0-... +2 x EZ-PK Z0 + MV-PKZ 0 +AGM or NHI |
|
For mounting in industrial control panels on CU 30 x 10 and 20 x 10 mm busbar arrangements with 60 mm phase separation. |
||||
| 25 | 10 | 54 | PKZM 0-... or PKZM 0-.../S(E)00 + AGM or NHI |
|
| 25 | 10 | 108 | 2 x PKZM 0-... or 2 x PKZM 0-.../S(E)00 +AGM or NHI, or 1 x PKZM 0-... +2 x EZ-PK Z0 + MV-PKZ 0 |
|
| 25 | 10 | 144 | 2 x PKZM 0-... or 2 x PKZM 0-.../S(E)00 +AGM or NHI, or 1 x PKZM 0-... +2 x EZ-PK Z0 + MV-PKZ 0 +AGM or NHI |
|
Adapter Extension |
||||
| --- | --- | 9 | Push fit strip can be fitted onto AD... to extend mounting width | |
MVS MOUNTING ACCESSORY KITS |
||
Type Article Number |
For Use With | Description |
| MVS Kits for full voltage non-reversing starter combinations. | ||
| PKZM0 + DILE(E)M | Includes mounting plate and finger safe wiring harness to accommodate FVNR motor starter combinations consisting of PKZM 0 motor protectors and DIL...M magnetic contactors in various HP sizes. UL listed/CSA certified for group installations and high fault short circuit current ratings in association with Moeller Electric components. | |
| PKZM0 + DIL00(A)M | ||
| PKZ0 + DIL0(A)M | ||
| Tophat rail adapter for motor protector combinations | ||
| Adapter plate, 45 mm wide, includes connection lug for expansion using MVS-C45 or MVS-C90H, includes connector to expand MVS-D... into a reversing starter. | ||
| Mounting plate, 90 mm wide, with continuous tophat rail, top and bottom. | ||
| Tophat rail adapter for motor protector + contactor combinations | ||
| PKZ0 + S(E)00-PKZ0 | For use with motor protector combinations in conjunction with other starters on MVS mounting plates. Parallel feed possible via three-phase bus bars. | |
| Tophat rail extension for tophat rail adapter | ||
| All MVS-C... | To allow for wider mounting plate for reversing starters with mechanical interlock. | |
| Electromechanical link between motor protector and contactor | ||
| PKZM0 + DILE(E)M(-G) | To electrically and mechanically link the PKZM0 motor protector and DILEM contactor. For use with and without MVS-C45. | |
| Electrical link between motor protector and contactor | ||
| PKZM0 + DILE(E)M(-G) | Flexible link between PKZM0 and DILM contactor
MVS-LB14/140: AWG 14, length 140 mm MVS-LB0-00M-G: AWG 12, length 110 mm MVS-LB0-0M-G: AWG 10, length 120mm |
|
| PKZM0 + DIL00(A)M(-G) | ||
| PKZM0 + DIL0(A)M(-G) | ||
MVS WIRING ACCESSORY KITS |
||||
Type Article Number |
For Use With | Description | ||
| Reversing starter wiring kits | ||||
DILE(E)M (+MVDILEM) DIULEM |
Consisting of a 3-pole paralleling link and a 3-pole reversing link with a bridge for terminal A2 on MVS-WB-EM, includes bridge for electrical interlock.
For Complete mounting of reversing starters on a MVS adapter, the following are also required: MVS kit MVS-D... for direct on line starters and MVS-C45 mounting plate.
For reversing starters with mechanical interlock (type MVS-...MV), an additional extension with MVS-H15 is required. Not required for DILEM starters. |
|||
DIL00(A)M + MVDILM DIUL00(A)M/MV |
||||
DIUL0(A)M + MVDILM DIUL0(A)M/MV |
||||
| Star-delta wiring kits | ||||
Type Article Number |
For Use With | Description | ||
| Mains Contactor | Delta Contactor | Start Contactor | ||
| DILE(E)M | DILE(E)M | DILE(E)M | Consisting of a 3-pole paralleling line, a 3-pole reversing
link and a start-point bridge. On MVS-SB-EM reversing link
with additional bridge for terminal A2 and paralleling link
with interlocking of star contactor / delta contactor.
For completely mounting star-delta starters on a MVS adapter, the following are also required: MVS kit MVS-D... for direct on line starters and MVS-C90H mounting plate. |
|
| DIL00AM | DIL00AM | DIL00AM | ||
| DIL0M | DIL0M | DIL00M | ||
| DIL0AM | DIL0AM | DIL0M | ||
| DIL1(A)M | DIL1(A)M | DIL0(A)M | ||
© 2016 KMParts.com, Inc. All rights reserved.