Contact Code Number:
The contact code number provides useful information of the relay. It refers to the total number of N.O. contacts (1st digit) and N.C. contacts (2nd digit) found on the device. Adding both digits will result in the total number of contacts.
Example:
DILER-22 + 04DIL E =
4 N.O. + 4 N.C. contacts, for a total of 8 eight contacts.
Some contact combinations are preferred when used in configurations conforming to European Norms (EN Standards). These are denoted by the letter ” E” in the contact code number and are in accordance with DIN EN 50 011. All other combinations without the letter ” E” are in accordance with DIN EN 50 005. In the example above, the combination of DILER-22
+04DILE yields a relay with Type E configuration (44E).
Moeller DILER-22-G
is now
EATON XTRM10A22TD
Industrial Control Relay
SAME EXACT PART- ONLY PART # CHANGE
Part # |
IEC rated operational at AC-15 220V 230V 240V |
UL/CSA Pilot Duty Rating | Normally Open | Normally Closed |
| DILER-22-G | 6 | A 600 P 300 |
2 | 2 |
DILER-22-G Wiring Diagram
DILER-22-G Dimensions
DILER-22-G Ordering Information
| Part Number | Article Number | Actuating Voltage | IEC rated operational at AC-15 220V 230V 240V |
Contact | |
NO |
NC |
||||
| DILER-31-G (110VDC) |
010043 | (110VDC) | 6 | 2 | 2 |
| DILER-31-G (12VDC) |
080728 | (12VDC) | 6 | 2 | 2 |
| DILER-31-G (220VDC) |
010091 | (220VDC) | 6 | 2 | 2 |
| DILER-31-G (24VDC) |
010042 | (24VDC) | 6 | 2 | 2 |
| DILER-31-G (48VDC) |
010346 | (48VDC) | 6 | 2 | 2 |
| DILER-31-G (110VDC) |
231806 | (110VDC) | 6 | 2 | 2 |
| DILER-31-G (220VDC) |
231807 | (220VDC) | 6 | 2 | 2 |
| DILER-31-G (24VDC) |
230177 | (24VDC) | 6 | 2 | 2 |