Service
distribution board mounting
(.../IVS) 1
Front IP30
For snap fitting to
EN 50022 top-hat rail
Flush mounting
– Service distribution boards: up to
3 contact units (45 mm mounting depth)
– Control panels: up to 11 contact units |
Rear mounting
(.../Z) 2
Front IP65
Secured by screw fixing or snap fitting
(T0 or T3)
For snap fitting to
EN 50022 top-hat rail
Coupling drive in door or cover
Connection from the front
Rear mounting main switches
(.../V/SVB)
2
Front IP65
According to IEC/EN 60204 and
IEC/EN 60947-3,
for T0... up to 8 and for T3...
up to 12 current paths
With door interlock in the On position |
Flush mounting
(.../E) 3
Front IP65
Fitting and connection from the rear
Terminal:
Pozidriv plus-minus screw
Finger- and back-of-hand proof
Type T8 with extension terminals as
standard
Flush mounting main switches
(.../EA/SVB) 3
Front IP65
According to IEC/EN 60204 and
IEC/EN 60947-3,
for T0... up to 8 and for T3...
up to 12 current paths
N terminal and PE terminal
Centre mounting (.../EZ) 3
Front IP65
Mounting in ∅ 22.3 fixing hole
according to IEC/EN 60947-5-1
“One-man installation” through centre
fixing |
Surface mounting
(.../I...) 4
IP65
With an additional terminal
Enclosures for metric cable glands
according to EN 50262
Surface mounting main switches
(.../I...) 4
IP65
According to IEC/EN 60204 and
IEC/EN 60947-3,
for T0... up to 8 and for T3...
up to 10 current paths
Lockable in 0 position with 3 padlocks
Enclosures for metric cable glands
according to EN 50262
With an additional terminal |
Safety switch
(.../I...) 5
IP65
With an additional terminal
With cover fuse in the 0 position
Lockable in 0 position with 3 padlocks
Enclosures for metric cable glands
according to EN 50262
With “Safety Switch” label
Colour: orange
in Switzerland: according to SUVA
Directive |
Main switch
(assembly kit)
for use as Emergency-Stop device
6
According to IEC/EN 60204-1
With red rotary handle and yellow locking
collar
Lockable in 0 position |
Main switch
(assembly kit) 7
Black rotary handle and locking collar
Lockable in the 0 (Off) position |
Thumb-grip
for use as Emergency-Stop device
8
According to IEC/EN 60204-1
Red thumb-grip with yellow front plate |
Thumb-grip 9
Black thumb-grip with front plate |
Coupling drive 10
Includes push-fit shaft
For retrofitting T0(T3)-.../XZ basic
switches for rear mounting
Spare parts for T0(T3)/(P1)-.../Z
For retrofit conversion of T5(B)-.../E
flush mounting switches for rear mounting
Spare part for T5(B)-.../Z |
332 KB
