Menu

Eaton/Moeller
T5B-2 Switch
Article Name Description

093094 T5B-2-8211/E ROTARY CAM SWITCH
093047 T5B-2-8221/E ROTARY CAM SWITCH

109926 T5B-2-8211/I4-NA ROTARY CAM SWITCH
109935 T5B-2-8221/I4-NA ROTARY CAM SWITCH

093082 T5B-2-8211/Z ROTARY CAM SWITCH
093044 T5B-2-8221/Z ROTARY CAM SWITCH

T5B-2 AWA
T5(B).../E(+SVB), T5(B).../EA/SVB
T5(B).../Z(+SVB), T5(B).../V/SVB
T5B.../I4, T5B.../I4/SVB, T5.../I5
T5.../I5/SVB
05/05 AWA1150-1692
332 KB

T5B-2 Overview


 
Service distribution board mounting
(.../IVS) 1
Front IP30
For snap fitting to
EN 50022 top-hat rail
Flush mounting
– Service distribution boards: up to
3 contact units (45 mm mounting depth)
– Control panels: up to 11 contact units		 Rear mounting (.../Z) 2
Front IP65
Secured by screw fixing or snap fitting
(T0 or T3)
For snap fitting to
EN 50022 top-hat rail
Coupling drive in door or cover
Connection from the front

Rear mounting main switches
(.../V/SVB)
2
Front IP65
According to IEC/EN 60204 and
IEC/EN 60947-3,
for T0... up to 8 and for T3...
up to 12 current paths
With door interlock in the On position
Flush mounting (.../E) 3
Front IP65
Fitting and connection from the rear
Terminal:
Pozidriv plus-minus screw
Finger- and back-of-hand proof
Type T8 with extension terminals as
standard
Flush mounting main switches

(.../EA/SVB) 3
Front IP65
According to IEC/EN 60204 and
IEC/EN 60947-3,
for T0... up to 8 and for T3...
up to 12 current paths
N terminal and PE terminal

Centre mounting (.../EZ) 3
Front IP65
Mounting in ∅ 22.3 fixing hole
according to IEC/EN 60947-5-1
“One-man installation” through centre
fixing		 Surface mounting (.../I...) 4
IP65
With an additional terminal
Enclosures for metric cable glands
according to EN 50262
Surface mounting main switches

(.../I...) 4
IP65
According to IEC/EN 60204 and
IEC/EN 60947-3,
for T0... up to 8 and for T3...
up to 10 current paths
Lockable in 0 position with 3 padlocks
Enclosures for metric cable glands
according to EN 50262
With an additional terminal
Safety switch (.../I...) 5
IP65
With an additional terminal
With cover fuse in the 0 position
Lockable in 0 position with 3 padlocks
Enclosures for metric cable glands
according to EN 50262
With “Safety Switch” label
Colour: orange
in Switzerland: according to SUVA
Directive		 Main switch (assembly kit)
for use as Emergency-Stop device
6
According to IEC/EN 60204-1
With red rotary handle and yellow locking
collar
Lockable in 0 position
Main switch (assembly kit) 7
Black rotary handle and locking collar
Lockable in the 0 (Off) position		 Thumb-grip
for use as Emergency-Stop device
8
According to IEC/EN 60204-1
Red thumb-grip with yellow front plate
Thumb-grip 9
Black thumb-grip with front plate		 Coupling drive 10
Includes push-fit shaft
For retrofitting T0(T3)-.../XZ basic
switches for rear mounting
Spare parts for T0(T3)/(P1)-.../Z
For retrofit conversion of T5(B)-.../E
flush mounting switches for rear mounting
Spare part for T5(B)-.../Z
 

View Rotary Switch Catalog Documentation


Let our expert sales staff guide you through finding the right products to fit your needs. CALL 866-595-9616.

© 2016 KMParts.com, Inc. All rights reserved.