Lightning Fast Orders!
Call Now To Place a Quick Order
Call an Expert-Fast Response
Call 1-866-595-9616
KMParts.com is "THE" source for industrial automation control components
Eaton
EASY-E4-DC-12TCX1
Nano Programmable Logic Controller
Eaton
EASY-E4-DC-12TCX1
Nano Programmable Logic Controller
Eaton
EASY-E4-DC-12TCX1
Nano Programmable Logic Controller
- 6 Base Unit Styles Available
- 8 Expansion Unit Styles Available
- Available With or Without Displays
- DIN Rail Mounted
- Connectable to Ethernet and BUS Systems
Description:
Electronic control relay easy-E4 with supply voltage 24 VDC. 8 digital inputs with 24VDC are available, of which 4 inputs can also be used as analog inputs and 4 inputs as fast counter. The control relay easy-E4 has 4 transitor outputs for 24 VDC. The control relay is equipped with diagnostic LEDs, a clock, an integrated Ethernet interface and screw terminals. This control relay easy-E4 can be extended with the digital input/output extensions of the easyE4 series.
EASY-E4-DC-12TCX1
Technical Specifications
Main Specifications
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Basic function | easyE4 base device |
| Description | Electronic control relay Rated operating voltage 24V DC 8 digital inputs for 24 VDC of these, 4 inputs can also be used as analog inputs and 4 inputs as fast counters 4 transistor outputs for 24 VDC with diagnostic LEDs Real-time clock with Ethernet interface Expandable with the easyE4 series of digital input/output expansions with easy-E4-CONNECT1 connector (Item Y7-197225) Screw terminals |
| Digital | 8 |
| of which can be used as analog | 4 |
| Quantity of outputs | Transistor: 4 |
| Real time clock | ✔ |
| Expansions | Expandable networkable (Ethernet) |
| Supply voltage | 24 V DC |
| Software | EASYSOFT-SWLIC/easySoft 7 |
| Connection type | screw terminal |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Standards | EN 61000-6-2 EN 61000-6-3 IEC 60068-2-6 IEC 60068-2-27 IEC 60068-2-30 IEC/EN 61131-2 EN 61010 EN 50178 |
| Approvals Approvals | cULus |
| Approvals certificate | CE |
| Approvals shipping classification | DNV GL |
| Approvals |  |
| Dimensions (W x H x D) | 71.5 x 90 x 58 mm |
| Weight | 0.155 kg |
| Mounting | Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories) |
| Connection type | screw terminal |
| Ethernet Connections | RJ45 plug, 8-pin |
| Ethernet Cable | CAT5 |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Screw terminals Solid | 0.2 - 4 mm2 |
| Screw terminals flexible | 0.2 - 2.5 mm2 |
| Screw terminals Solid or flexible conductor, with ferrule | 0,2 - 2,5 mm2 |
| Screw terminals Solid or stranded | 22 - 12 AWG |
| Screw terminals Standard screwdriver | 0.8 x 3.5 mm |
| Screw terminals Tightening torque | 0.5 - 0.7 Nm |
| Screw terminals Stripping length | 6.5 mm |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Status indicator (LED) | Power/RUN Ethernet |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Operating ambient temperature | -25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C |
| Condensation | Take appropriate measures to prevent condensation |
| Storage [ϑ] | -40 - +70 °C |
| relative humidity | in accordance with IEC 60068-2-30, IEC 60068-2-78 5 - 95 % |
| Air pressure (operation) | 795 - 1080 hPa |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Protection type (IEC/EN 60529, EN50178, VBG 4) | IP20 |
| Vibrations | In accordance with IEC 60068-2-6 constant amplitude 0.15 mm: 10 - 57 constant acceleration 2 g: 57 - 150 Hz |
| Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms | 18 Impacts |
| Drop to IEC/EN 60068-2-31 [Drop height] | 50 mm |
| Free fall, packaged (IEC/EN 60068-2-32) | 0.3 m |
| Mounting position | Vertical or horizontal |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Overvoltage category/pollution degree | III/2 |
| Electrostatic discharge (ESD) applied standard | nach IEC/EN 61000-4-2 |
| Electrostatic discharge (ESD) Air discharge | 8 kV |
| Electrostatic discharge (ESD) Contact discharge | 6 kV |
| Electromagnetic fields (RFI) to IEC EN 61000-4-3 | 0.08 - 1.0 GHz: 10 1.4 - 2 GHz: 3 2.0 - 2.7 GHz: 1 V/m |
| Radio interference suppression | EN 61000-6-3 Class B |
| Burst | according to IEC/EN 61000-4-4 Supply cables: 2 Signal cables: 2 kV |
| power pulses (Surge) | according to IEC/EN 61000-4-5 0.5 kV (supply cables, symmetrical) 1 kV (supply cables, asymmetrical) |
| Immunity to line-conducted interference to (IEC/EN 61000-4-6) | 10 V |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Clearance in air and creepage distances | nach EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201 |
| Insulation resistance | per EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201 |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Back-up of real-time clock |  |
| ① Backup time (hours) with fully charged double layer capacitor ② Service life (years) | |
| Accuracy of the real-time clock | typ. ± 2 (± 0.2 h⁄Year) s/day |
| depending on ambient air temperature fluctuations of up to ± 5 s/day (± 0.5 h⁄year) are possible |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Accuracy of timing relays (of values) | ± 0.02 % |
| Resolution Range “S” | 5 ms |
| Resolution Range “M:S” | 1 s |
| Resolution Range “H:M” | 1 min |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Rated operational voltage [Ue] | 24 DC (-15/+20%) V |
| Permissible range [Ue] | 20.4 - 28.8 V DC |
| Residual ripple | ≦ 5 % |
| Protection against polarity reversal | yes |
| Input current | max. 80 mA at Ue |
| Voltage dips | ≤ 10 ms |
| Fuse | ≧ 1A (T) A |
| Power loss [P] | Normally 2 W |
| Heat dissipation at 24 V DC | 2 W |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Number | 8 |
| Inputs can be used as analog inputs | 4 (I5, I6, I7, I8) |
| Potential isolation | from power supply: no to the memory card: no to Ethernet: yes between inputs: no from the outputs: yes to expansion devices: yes |
| Rated operational voltage [Ue] | 24 V DC |
| Input voltage | Signal 0: ≦ 5 (I1 - I8) Condition 1: ≧ 15 (I1 - I8) V DC |
| Input current at signal 1 | 3.3 (I1 – I4) 1.8 (I5 – I8) mA |
| Deceleration time | 20 (0 -> 1/1 -> 0, Debounce ON) type 0.015 (0 -> 1/1 -> 0, Debounce OFF) ms |
| Cable length | 100 (unshielded) m |
| Frequency counter Number | 4 (I1, I2, I3, I4) |
| Frequency counter Counter frequency | ≦ 5 kHz |
| Frequency counter Pulse shape | Square |
| Frequency counter Pulse pause ratio | 1:1 |
| Frequency counter Cable length | ≦ 20 (screened) m |
| Incremental counter Number of counter inputs | 2 (I1 + I2, I3 + I4) |
| Incremental counter Value range | -2147483648 to +2147483647 |
| Incremental counter Counter frequency | ≦ 5 kHz |
| Incremental counter Pulse shape | Square |
| Incremental counter Signal offset | 90° |
| Incremental counter Pulse pause ratio | 1:1 |
| Incremental counter Cable length | ≦ 20 (screened) m |
| Rapid counter inputs Number | 4 (I1, I2, I3, I4) |
| Rapid counter inputs Value range | -2147483648 to +2147483647 |
| Rapid counter inputs Counter frequency | ≦ 10 kHz |
| Rapid counter inputs Pulse shape | Square |
| Rapid counter inputs Pulse pause ratio | 1:1 |
| Rapid counter inputs Cable length | ≦ 20 (screened) m |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Number | 4 (I5, I6, I7, I8) |
| Potential isolation | from power supply: no to the memory card: no to Ethernet: yes between inputs: no from the outputs: yes to expansion devices: yes |
| Input type | DC voltage |
| Signal range | 0-10 V DC |
| Resolution | 12 Bit (value 0 - 4095) |
| Input impedance | 13.3 kΩ |
| Accuracy of actual value two devices from series | ± 3 , ± 0.12 V % |
| Accuracy of actual value Within a single device | ± 2, ± 0.12 V % |
| Conversion time, analog/digital | each CPU cycle ms |
| Input current | < 1 mA |
| Cable length | ≦ 30, screened m |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Number | 4 |
| Rated operational voltage [Ue] | 24 V DC |
| Permissible range [Ue] | 20.4 - 28.8 V DC |
| Residual ripple | 5 % |
| Supply current | Norm./max. 15 mA |
| Protection against polarity reversal | Yes (Caution: A short circuit will occur if a supply voltage of the wrong polarity is applied to the outputs.) |
| Potential isolation | from power supply: yes to the memory card: yes to Ethernet: yes From the inputs: yes to control buttons: yes between the outputs: no to expansion devices: yes |
| Rated operational current at signal „1” DC per channel [Ie] | Max. 0.5 A |
| Residual current on 0 signal per channel | < 0.005 mA |
| Max. output voltage | 1 (at status 0 per channel) U = Ue - 1 V (signal 1 at Ie = 0.5 A) V |
| Short-circuit protection | yes, electronic (Q1 - Q4) |
| Short-circuit tripping current for Ra ≦ 10 mΩ | 0.7 ≦ Ie ≦ 1.7 per output depending on number of active channels and their load A |
| Total short-circuit current | 6.8 A |
| Thermal cutout | Yes |
| Max. operating frequency with constant resistive load | abhängig von der Zykluszeit des Basisgeräts und bei Erweiterungsgeräten auch von deren Übertragungszeit Operations/h |
| Parallel connection of outputs With resistive load, inductive load with external suppressor circuit, combination within a group | Group 1: Q1 to Q4 |
| Parallel connection of outputs Number of outputs [max.] | 4 |
| Parallel connection of outputs Max. total current | 2 A |
| Inductive load to EN 60947-5-1 Without external suppressor circuit DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H Utilization factor | 0.25 g |
| Inductive load to EN 60947-5-1 Without external suppressor circuit DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H Duty factor | 100 % DF |
| Inductive load to EN 60947-5-1 Without external suppressor circuit T0.95 = 15 ms, R = 48 Ω, L = 0.24 H Utilization factor | 0.25 g |
| Inductive load to EN 60947-5-1 Without external suppressor circuit T0.95 = 15 ms, R = 48 Ω, L = 0.24 H Duty factor | 100 % DF |
| Inductive load to EN 60947-5-1 With external suppressor circuit Utilization factor | 1 g |
| Inductive load to EN 60947-5-1 With external suppressor circuit Duty factor | 100 % DF |
| Inductive load to EN 60947-5-1 With external suppressor circuit Max. switching frequency, max. duty factor | Depending on the suppressor circuit Operations |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Data transfer rate | 10/100 Mbit/s |
| Connections | RJ45 plug, 8-pin |
| Cable | CAT5 |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| Static heat dissipation, non-current-dependent [Pvs] | 2 W |
| Operating ambient temperature min. | -25 °C |
| Operating ambient temperature max. | +55 °C |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| 10.2 Strength of materials and parts 10.2.2 Corrosion resistance | Meets the product standard's requirements. |
| 10.2 Strength of materials and parts 10.2.3.1 Verification of thermal stability of enclosures | Meets the product standard's requirements. |
| 10.2 Strength of materials and parts 10.2.3.2 Verification of resistance of insulating materials to normal heat | Meets the product standard's requirements. |
| 10.2 Strength of materials and parts 10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects | Meets the product standard's requirements. |
| 10.2 Strength of materials and parts 10.2.4 Resistance to ultra-violet (UV) radiation | Meets the product standard's requirements. |
| 10.2 Strength of materials and parts 10.2.5 Lifting | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts 10.2.6 Mechanical impact | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts 10.2.7 Inscriptions | Meets the product standard's requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard's requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard's requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Is the panel builder's responsibility. |
| 10.8 Connections for external conductors | Is the panel builder's responsibility. |
| 10.9 Insulation properties 10.9.2 Power-frequency electric strength | Is the panel builder's responsibility. |
| 10.9 Insulation properties 10.9.3 Impulse withstand voltage | Is the panel builder's responsibility. |
| 10.9 Insulation properties 10.9.4 Testing of enclosures made of insulating material | Is the panel builder's responsibility. |
| 10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.11 Short-circuit rating | Is the panel builder's responsibility. |
| 10.12 Electromagnetic compatibility | Is the panel builder's responsibility. |
| 10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| PLC's (EG000024) / Logic module (EC001417) | |
| Electric engineering, automation, process control engineering / Control / Programmable logic control (SPS) / Logic module (ecl@ss10.0.1-27-24-22-16 [AKE539014]) | |
| Supply voltage AC 50 Hz | 0 - 0 V |
| Supply voltage AC 60 Hz | 0 - 0 V |
| Supply voltage DC | 20.4 - 28.8 V |
| Voltage type of supply voltage | DC |
| Switching current | 0.5 A |
| Number of analogue inputs | 4 |
| Number of analogue outputs | 0 |
| Number of digital inputs | 8 |
| Number of digital outputs | 4 |
| With relay output | No |
| Number of HW-interfaces industrial Ethernet | 1 |
| Number of interfaces PROFINET | 0 |
| Number of HW-interfaces RS-232 | 0 |
| Number of HW-interfaces RS-422 | 0 |
| Number of HW-interfaces RS-485 | 0 |
| Number of HW-interfaces serial TTY | 0 |
| Number of HW-interfaces USB | 0 |
| Number of HW-interfaces parallel | 0 |
| Number of HW-interfaces Wireless | 0 |
| Number of HW-interfaces other | 1 |
| With optical interface | No |
| Supporting protocol for TCP/IP | Yes |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for CAN | No |
| Supporting protocol for INTERBUS | No |
| Supporting protocol for ASI | No |
| Supporting protocol for KNX | No |
| Supporting protocol for MODBUS | Yes |
| Supporting protocol for Data-Highway | No |
| Supporting protocol for DeviceNet | No |
| Supporting protocol for SUCONET | No |
| Supporting protocol for LON | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for EtherNet/IP | No |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Radio standard UMTS | No |
| IO link master | No |
| Redundancy | No |
| With display | No |
| Degree of protection (IP) | IP20 |
| Basic device | Yes |
| Expandable | Yes |
| Expansion device | No |
| With timer | Yes |
| Rail mounting possible | Yes |
| Wall mounting/direct mounting | Yes |
| Front build in possible | Yes |
| Rack-assembly possible | No |
| Suitable for safety functions | No |
| Category according to EN 954-1 | None |
| SIL according to IEC 61508 | None |
| Performance level acc. EN ISO 13849-1 | None |
| Appendant operation agent (Ex ia) | No |
| Appendant operation agent (Ex ib) | No |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Width | 71.5 mm |
| Height | 90 mm |
| Depth | 58 mm |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
| UL File No. | E205091 |
| UL Category Control No. | NRAQ/7 |
| North America Certification | UL listed |
| Degree of Protection | IEC: IP20, UL/CSA Type: - |
| Description | EASY-E4-DC-12TCX1 Base Unit |
|---|---|
 |
Product Accessories
Starter Pack
Starter Pack
Starter Pack
Software
10W Power Supply
30W Power Supply
60W Power Supply
100W Power Supply
Spare Parts
Memory Card
Copyright © 2022 KMParts.com
- Phone: +1-866-595-9616
- Fax: +1-941-473-0987
- Email: sales@kmparts.com
- Address: 1580 Market Cir #1
- Port Charlotte, FL 33953
- Hours: M-F 7:30a.m. - 5:30p.m. EDT
