Eaton Molded Case Circuit Breaker Series-C, F-Frame
Type ED Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units
Suitable for Reverse Feed
| Maximum Continuous Ampere Rating at 40°C |
240 Vac Maximum, 125 Vdc (Includes Terminals on Load End Only) 65 kAIC at 240 Vac |
|
| Two-Pole Part Number |
Three-Pole Part Number |
|
| 15 | ED2015 | ED3015 |
| 20 | ED2020 | ED3020 |
| 25 | ED2025 | ED3025 |
| 30 | ED2030 | ED3030 |
| 35 | ED2035 | ED3035 |
| 40 | ED2040 | ED3040 |
| 50 | ED2050 | ED3050 |
| 60 | ED2060 | ED3060 |
| 100 | ED2100 | ED3100 |
| 125 | ED2125 | ED3125 |
| 150 | ED2150 | ED3150 |
| 175 | ED2175 | ED3175 |
| 200 | ED2200 | ED3200 |
| 225 | ED2225 | ED3225 |
Type EDH Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units
Suitable for Reverse Feed
| Maximum Continuous Ampere Rating at 40°C |
240 Vac Maximum, 125 Vdc (Includes Terminals on Load End Only) 100 kAIC at 240 Vac |
|
| Two-Pole Part Number |
Three-Pole Part Number |
|
| 15 | — | — |
| 20 | — | — |
| 25 | — | — |
| 30 | — | — |
| 35 | — | — |
| 40 | — | — |
| 50 | — | — |
| 60 | — | — |
| 100 | EDH2100 | EDH3100 |
| 125 | EDH2125 | EDH3125 |
| 150 | EDH2150 | EDH3150 |
| 175 | EDH2175 | EDH3175 |
| 200 | EDH2200 | EDH3200 |
| 225 | EDH2225 | EDH3225 |
Type EDC Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units
Suitable for Reverse Feed
| Maximum Continuous Ampere Rating at 40°C |
240 Vac Maximum, 125 Vdc (Includes Terminals on Load End Only) 200 kAIC at 240 Vac |
|
| Two-Pole Part Number |
Three-Pole Part Number |
|
| 15 | — | — |
| 20 | — | — |
| 25 | — | — |
| 30 | — | — |
| 35 | — | — |
| 40 | — | — |
| 50 | — | — |
| 60 | — | — |
| 100 | EDC2100 | EDC3100 |
| 125 | EDC2125 | EDC3125 |
| 150 | EDC2150 | EDC3150 |
| 175 | EDC2175 | EDC3175 |
| 200 | EDC2200 | EDC3200 |
| 225 | EDC2225 | EDC3225 |
Type EDB Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units
Suitable for Reverse Feed
| Maximum Continuous Ampere Rating at 40°C |
240 Vac Maximum, 125 Vdc (Includes Terminals on Load End Only) 22 kAIC at 240 Vac |
|
| Two-Pole Part Number |
Three-Pole Part Number |
|
| 100 | EDB2100 | EDB3100 |
| 110 | EDB2110 | EDB3110 |
| 125 | EDB2125 | EDB3125 |
| 150 | EDB2150 | EDB3150 |
| 175 | EDB2175 | EDB3175 |
| 200 | EDB2200 | EDB3200 |
| 225 | EDB2225 | EDB3225 |
Type EDS Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units
Suitable for Reverse Feed
| Maximum Continuous Ampere Rating at 40°C |
240 Vac Maximum, 125 Vdc (Includes Terminals on Load End Only) 42 kAIC at 240 Vac |
|
| Two-Pole Part Number |
Three-Pole Part Number |
|
| 100 | EDS2100 | EDS3100 |
| 110 | EDS2110 | EDS3110 |
| 125 | EDS2125 | EDS3125 |
| 150 | EDS2150 | EDS3150 |
| 175 | EDS2175 | EDS3175 |
| 200 | EDS2200 | EDS3200 |
| 225 | EDS2225 | EDS3225 |
Type EHD Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units
(Includes Terminals on Load End Only)
| Maximum Continuous Ampere Rating at 40°C |
277 Vac Maximum, 125 Vdc 14 kAIC at 277 Vac |
480 Vac Maximum, 250 Vdc 14 kAIC at 480 Vac |
|
| Single-Pole Part Number |
Two-Pole Part Number |
Three-Pole Part Number |
|
| 10(1) | EHD1010 | EHD2010 | EHD3010 |
| 15 | EHD1015(2) | EHD2015 | EHD3015 |
| 20 | EHD1020(2) | EHD2020 | EHD3020 |
| 25 | EHD1025 | EHD2025 | EHD3025 |
| 30 | EHD1030 | EHD2030 | EHD3030 |
| 35 | EHD1035 | EHD2035 | EHD3035 |
| 40 | EHD1040 | EHD2040 | EHD3040 |
| 45 | EHD1045 | EHD2045 | EHD3045 |
| 50 | EHD1050 | EHD2050 | EHD3050 |
| 60 | EHD1060 | EHD2060 | EHD3060 |
| 70 | EHD1070 | EHD2070 | EHD3070 |
| 80 | EHD1080 | EHD2080 | EHD3080 |
| 90 | EHD1090 | EHD2090 | EHD3090 |
| 100 | EHD1100 | EHD2100 | EHD3100 |
NOTES:
(1) Not UL listed. 5 kAIC interrupting rating.
(2) UL listed for SWD applications, see NEC Article 240.83(d).
Type FDB Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units
(Includes Terminals on Load End Only)
| Maximum Continuous Ampere Rating at 40°C |
600 Vac Maximum, 250 Vdc 14 kAIC at 600 Vac |
||
| Single-Pole Part Number |
Two-Pole Part Number |
Three-Pole Part Number |
|
| 10(1) | FDB2010 | FDB3010 | FDB4010 |
| 15 | FDB2015 | FDB3015 | FDB4015 |
| 20 | FDB2020 | FDB3020 | FDB4020 |
| 25 | FDB2025 | FDB3025 | FDB4025 |
| 30 | FDB2030 | FDB3030 | FDB4030 |
| 35 | FDB2035 | FDB3035 | FDB4035 |
| 40 | FDB2040 | FDB3040 | FDB4040 |
| 45 | FDB2045 | FDB3045 | FDB4045 |
| 50 | FDB2050 | FDB3050 | FDB4050 |
| 60 | FDB2060 | FDB3060 | FDB4060 |
| 70 | FDB2070 | FDB3070 | FDB4070 |
| 80 | FDB2080 | FDB3080 | FDB4080 |
| 90 | FDB2090 | FDB3090 | FDB4090 |
| 100 | FDB2100 | FDB3100 | FDB4100 |
| 110 | FDB2110 | FDB3110 | FDB4110 |
| 125 | FDB2125 | FDB3125 | FDB4125 |
| 150 | FDB2150 | FDB3150 | FDB4150 |
NOTES:
(1) Not UL listed. 5 kAIC interrupting rating.
(2) UL listed for SWD applications, see NEC Article 240.83(d).
Type FD Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units
(Includes Terminals on Load End Only)
| Maximum Continuous Ampere Rating at 40°C |
277 Vac Maximum, 125 Vdc 35 kAIC at 277 Vac |
600 Vac Maximum, 250 Vdc 35 kAIC at 480 Vac |
||
| Single-Pole Part Number |
Two-Pole Part Number |
Three-Pole Part Number |
Four-Pole Part Number |
|
| 10(1) | FD1010 | — | — | — |
| 15 | FD1015(2) | FD2015 | FD3015 | FD4015 |
| 20 | FD1020(2) | FD2020 | FD3020 | FD4020 |
| 25 | FD1025 | FD2025 | FD3025 | FD4025 |
| 30 | FD1030 | FD2030 | FD3030 | FD4030 |
| 35 | FD1035 | FD2035 | FD3035 | FD4035 |
| 40 | FD1040 | FD2040 | FD3040 | FD4040 |
| 45 | FD1045 | FD2045 | FD3045 | FD4045 |
| 50 | FD1050 | FD2050 | FD3050 | FD4050 |
| 60 | FD1060 | FD2060 | FD3060 | FD4060 |
| 70 | FD1070 | FD2070 | FD3070 | FD4070 |
| 80 | FD1080 | FD2080 | FD3080 | FD4080 |
| 90 | FD1090 | FD2090 | FD3090 | FD4090 |
| 100 | FD1100 | FD2100 | FD3100 | FD4100 |
| 110 | FD1110 | FD2110 | FD3110 | FD4110 |
| 125 | FD1125 | FD2125 | FD3125 | FD4125 |
| 150 | FD1150 | FD2150 | FD3150 | FD4150 |
| 175 | — | FD2175 | FD3175 | FD4175 |
| 200 | — | FD2200 | FD3200 | FD4200 |
| 225 | — | FD2225 | FD3225 | FD4225 |
NOTES:
(1) Not UL listed. 5 kAIC interrupting rating.
(2) UL listed for SWD applications, see NEC Article 240.83(d).
Type HFD Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units
(Includes Terminals on Load End Only)
| Maximum Continuous Ampere Rating at 40°C |
277 Vac Maximum, 125 Vdc 65 kAIC at 277 Vac |
600 Vac Maximum, 250 Vdc 65 kAIC at 480 Vac |
||
| Single-Pole Part Number |
Two-Pole Part Number |
Three-Pole Part Number |
Four-Pole Part Number |
|
| 15 | HFD1015(1) | HFD2015 | HFD3015 | HFD4015 |
| 20 | HFD1020(1) | HFD2020 | HFD3020 | HFD4020 |
| 25 | HFD1025 | HFD2025 | HFD3025 | HFD4025 |
| 30 | HFD1030 | HFD2030 | HFD3030 | HFD4030 |
| 35 | HFD1035 | HFD2035 | HFD3035 | HFD4035 |
| 40 | HFD1040 | HFD2040 | HFD3040 | HFD4040 |
| 45 | HFD1045 | HFD2045 | HFD3045 | HFD4045 |
| 50 | HFD1050 | HFD2050 | HFD3050 | HFD4050 |
| 60 | HFD1060 | HFD2060 | HFD3060 | HFD4060 |
| 70 | HFD1070 | HFD2070 | HFD3070 | HFD4070 |
| 80 | HFD1080 | HFD2080 | HFD3080 | HFD4080 |
| 90 | HFD1090 | HFD2090 | HFD3090 | HFD4090 |
| 100 | HFD1100 | HFD2100 | HFD3100 | HFD4100 |
| 110 | HFD1110 | HFD2110 | HFD3110 | HFD4110 |
| 125 | HFD1125 | HFD2125 | HFD3125 | HFD4125 |
| 150 | HFD1150 | HFD2150 | HFD3150 | HFD4150 |
| 175 | — | HFD2175 | HFD3175 | HFD4175 |
| 200 | — | HFD2200 | HFD3200 | HFD4200 |
| 225 | — | HFD2225 | HFD3225 | HFD4225 |
NOTES:
(1) UL listed for SWD applications, see NEC Article 240.83(d).
Type FDC Thermal-Magnetic Circuit Breakers with Non-Interchangeable Trip Units
(Includes Terminals on Load End Only)
| Maximum Continuous Ampere Rating at 40°C |
600 Vac Maximum, 250 Vdc 100 kAIC at 480 Vac |
||
| Two-Pole Part Number |
Three-Pole Part Number |
Four-Pole Part Number |
|
| 15 | FDC2015 | FDC3015 | FDC4015 |
| 20 | FDC2020 | FDC3020 | FDC4020 |
| 25 | FDC2025 | FDC3025 | FDC4025 |
| 30 | FDC2030 | FDC3030 | FDC4030 |
| 35 | FDC2035 | FDC3035 | FDC4035 |
| 40 | FDC2040 | FDC3040 | FDC4040 |
| 45 | FDC2045 | FDC3045 | FDC4045 |
| 50 | FDC2050 | FDC3050 | FDC4050 |
| 60 | FDC2060 | FDC3060 | FDC4060 |
| 70 | FDC2070 | FDC3070 | FDC4070 |
| 80 | FDC2080 | FDC3080 | FDC4080 |
| 90 | FDC2090 | FDC3090 | FDC4090 |
| 100 | FDC2100 | FDC3100 | FDC4100 |
| 110 | FDC2110 | FDC3110 | FDC4110 |
| 125 | FDC2125 | FDC3125 | FDC4125 |
| 150 | FDC2150 | FDC3150 | FDC4150 |
| 175 | FDC2175 | FDC3175 | FDC4175 |
| 200 | FDC2200 | FDC3200 | FDC4200 |
| 225 | FDC2225 | FDC3225 | FDC4225 |
Types FDE, HFDE and FDCE Electronic Circuit Breakers with Non-Interchangeable Trip Units
| Maximum Ampere Rating |
Neutral CT for LSG and LSIG |
LS Part Number |
LSI Part Number |
LSG Part Number |
LSIG Part Number |
| IC Rating 35 kAIC at 480 Vac | |||||
| 80 | CTF080 | FDE308033 | FDE308032 | FDE308035 | FDE308036 |
| 160 | CTF160 | FDE316033 | FDE316032 | FDE316035 | FDE316036 |
| 225 | CTF225 | FDE322533 | FDE322532 | FDE322535 | FDE322536 |
| IC Rating 65 kAIC at 480 Vac | |||||
| 80 | CTF080 | HFDE308033 | HFDE308032 | HFDE308035 | HFDE308036 |
| 160 | CTF160 | HFDE316033 | HFDE316032 | HFDE316035 | HFDE316036 |
| 225 | CTF225 | HFDE322533 | HFDE322532 | HFDE322535 | HFDE322536 |
| IC Rating 100 kAIC at 480 Vac(1) | |||||
| 80 | CTF080 | FDCE308033 | FDCE308032 | FDCE308035 | FDCE308036 |
| 160 | CTF160 | FDCE316033 | FDCE316032 | FDCE316035 | FDCE316036 |
| 225 | CTF225 | FDCE322533 | FDCE322532 | FDCE322535 | FDCE322536 |
NOTES:
(1) Check for availability.
FDE Electronic Breaker with Zone Selective Interlocking
| Ampere Rating |
LSI w/ZSI Part Number |
LSIG w/ZSI Part Number |
| 35 kAIC at 480 Vac | ||
| 80 | FDE308032ZG | FDE308036ZG |
| 160 | FDE316032ZG | FDE316036ZG |
| 225 | FDE322532ZG | FDE322536ZG |
| 65 kAIC at 480 Vac | ||
| 80 | HFDE308032ZG | HFDE308036ZG |
| 160 | HFDE316032ZG | HFDE316036ZG |
| 225 | HFDE322532ZG | HFDE322536ZG |
Digitrip Electronic Trip Units
| Circuit Breaker Type | Frame | Ratings |
| FDE, HFDE, FDCE | 225 | 100, 110, 125, 150, 160, 175, 200, 225 |
| FDE, HFDE, FDCE | 160 | 60, 70, 80, 90, 100, 125, 150, 160 |
| FDE, HFDE, FDCE | 80 | 15, 20, 30, 40, 50, 60, 70, 80 |
Molded Case Switches
Eaton’s molded case switches are used as compact switches in applications requiring high current switching capabilities. Molded case switches are constructed of circuit breaker components and are of the high instantaneous automatic type. Molded case switches are listed in accordance with Underwriters Laboratories Standard UL 489. (NOTE: Molded case switches will open above 1800 amperes.)
| Maximum Continuous Ampere Rating at 40°C |
Complete Circuit Breaker with Load Side Terminals Only | ||
| 480 Vac Maximum, 250 Vdc | 600 Vac Maximum, 250 Vdc | ||
| Part Number | Part Number | Part Number | |
| Two-Pole | |||
| 100 | EHD2100K | FD2100K | HFD2100K |
| 150 | — | FD2150K | HFD2150K |
| 225 | — | FD2225K | HFD2225K |
| Three-Pole | |||
| 100 | EHD3100K | FD3100K | HFD3100K |
| 150 | — | FD3150K | HFD3150K |
| 225 | — | FD3225K | HFD3225K |
| Four-Pole | |||
| 100 | — | FD4100K | HFD4100K |
| 150 | — | FD4150K | HFD4150K |
| 225 | — | FD4225K | HFD4225K |
Accessories and Ordering Information
Breaker Mount Ammeter(1)
| Description | Part Number |
| Breaker Mount Ammeter | DIGIVIEW |
Line and Load Terminals
Line and load terminals provide wire connecting capabilities for specific ranges of continuous current ratings and wire types. Except as noted, terminals comply with Underwriters Laboratories Standards UL 486A and UL 486B. Unless otherwise specified, F-Frame circuit breakers are factory equipped with load terminals only.
Ordering Information
F-Frame circuit breakers and molded case switches have load terminals only as standard equipment. When standard line-end terminals (same as standard load-end terminals) are required, add Suffix L to the circuit breaker catalog number. When nonstandard or optional line and/ or load terminals are required, order by style number. Specify if factory installation is required.
Line and Load Terminals
| Maximum Breaker Amperes |
Terminal Body Material | Wire Type | AWG Wire Range |
Metric Wire Range mm2 |
Package of Three Terminals Part Number |
| Standard Pressure Type Terminals | |||||
| 20 (EHD) | Steel | Cu/AI | 14—10 | 2.5—4 | 3T20FB(2) |
| 100 | Steel | Cu/AI | 14—1/0 | 2.5—50 | 3T100FB |
| 225 | Aluminum | Cu/AI | 4—4/0 | 25—95 | 3TA225FD |
| Optional Pressure Terminals | |||||
| 50 | Aluminum | Cu/AI | 14—4 | 2.5—25 | 3TA50FB(2) |
| 100 | Aluminum | Cu/AI | 14—1/0 | 2.5—50 | 3TA100FD |
| 200 | Stainless steel | Cu | 4—4/0 | 25—95 | 3T150FB |
| 225 | Copper | Cu | 4—4/0 | 25—95 | 3T225FD |
| 225 | Aluminum | Cu/AI | 6—300 kcmil | 16—150 | 3TA225FDK(3) |
NOTES:
(1) Use on FDE, HFDE and FDCE electronic trip only.
(2) Not for use with ED, EDH, EDC breakers.
(3) Includes terminal shield kit. Adds approximately 3 inches (76.2) to breaker height. Available for use on three-pole breaker only.
Line and Load Terminals
 |
 |
 |
| Assemble wire clamp to bottom of conductor as shown. | Insert collar enclosing conductor as shown. Locate nut on top of conductor and tighten securely with screw and washer. Caution: Collar must surround conductor. | Insert collar enclosing conductor and center on extrusion on collar. Install clip with legs on top of conductor and snap end around bottom of collar. |
 |
 |
 |
| Assemble collar on top of conductor as shown. Tighten securely with screw and washer. | Collar slides onto conductor and is held in position by a screw and lockwasher. | Assemble collar on top of
conductor as shown. Tighten securely with screw and washer.
Terminal shield must be used with this collar. Note: For 185 mm2, use 3TA225FDK1. |