Menu

Eaton AN13GN0A5E
Type CN13/53 Non-Reversing
& Reversing Space-Savings
NEMA Contactors
AN13GN0A5E - Type CN13/53 Space-Savings Three-Pole Non-Reversing and Reversing

Type AN13/53
Space-Savings
Non-Reversing Starter
with XTOE Electronic
Overload Relay

NEMA Size = 2

Continuous Ampere Rating = 45

NOTE: Add Coil Suffix Code (see table below)
For Complete Part Number

Series Part Numbers
NEMA
Size		 Continuous
Ampere
Rating		 Service
Limit
Current
Rating (Amps)		 Maximum
UL Hp
Three-Phase		 Standard
MCC
Bucket Size		 Three-Pole
Non-
Reversing (1)(2)
Part Number		 Three-Pole
Reversing (1)(2)
Part Number
230V 480V
0 18 21 2 5 Not offered AN13BN0A5E_ AN53BN0A5E_
1C 27 32 3 10 Not offered AN13CN0A5E_ AN53CN0A5E_
1 27 32 3 10 1X AN13DN0A5E_ AN53DN0A5E_
2 45 52 7-1/2 25 1X AN13GN0A5E_ AN53GN0A5E_
3 90 104 - 50 2X AN13KN0A5E_ AN53KN0A5E_
4 135 156 - 100 2X AN13NN0A5E_ AN53NN0A5E_
5 (3) 270 311 - 200 6X AN13SN0A5E_ AN53SN0A5E_

XTOE Overload FLA Range
(FVNR and FVR Starters Only) Magnet Coil Suffix
NEMA Size OLR Code FLA Range OLR Code FLA Rating
0    1P6 0.33–1.65A 020 4.0–20A
005 1.0–5.0A — —
1C/1 1P6(4) 0.33–1.65A 020 4.0–20A
005 1.0–5.0A 045  9.0–45A
2 — — 045 9.0–45A
— — — —
3 100 20–100A — —
4 175 35–175A — —
5(3) 300 60–300A — —

Coil Suffix Code
Coil Voltage Suffix Code
Sizes 0–2
110V 50 Hz, 120V 60 Hz A
220V 50 Hz, 240V 60 Hz B
24–27 Vdc TD
Sizes 3, 4
100–120V 50/60 Hz A
190–240V 50/60 Hz B
24–27 Vdc TD
Sizes 5
100–120V 50/60 Hz A
24–48 Vdc TD

NOTES:
(1) RED A indicates coils suffix required, see Coil Suffix table above.
(2) Underscore (_) indicates OLR designation required, see XTOE FLA Range table above.
(3) NEMA Size 5 starter available with 60-300A panel mounted CTs. Starter shipped as an assembled unit with 1–5A C440 overload relay (C440A1A005SELAX or C440A2A005SELAX).
(4) Not available on AN13DN or AN53DN starters.

Contactor
Technical Data and Specifications
Sizes 0-2
Description Size 0
CN13BN010_		 Size 1C
CN13CN010_		 Size 1
CN13DN000_		 Size 2
CN13GN000_
General
Standards IEC/EN 60947,
VDE 0660, UL,
CSA,
CCC, RoHS		 IEC/EN 60947,
VDE 0660, UL,
CSA,
CCC, RoHS		 IEC/EN 60947,
VDE 0660, UL,
CSA,
CCC, RoHS		 IEC/EN 60947,
VDE 0660, UL,
CSA,
CCC, RoHS
Weights in kg [lb]
AC operated		 0.42 [0.93] 0.42 [0.93] 0.9 [2.0] 0.9 [2.0]
Weights in kg [lb]
DC operated		 0.48 [1.06] 0.48 [1.06] 1.1 [2.4] 1.1 [2.4]
Mechanical life
operations		 10,000,000 10,000,000 10,000,000 10,000,000
Climatic proofing (1) (1) (1) (1)
Insulation voltage
(Ui) Vac		 690 690 690 690
Impulse withstand
voltage (Uimp) Vac		 8000 8000 8000 8000
Operating voltage
(Ue) Vac		 690 690 690 690
Safe isolation to
VDE 0106 Part 101
and Part 101/A1
Between coil and
contacts (Vac)		 440 440 440 440
Safe isolation to
VDE 0106 Part 101
and Part 101/A1
Between contacts (Vac)		 238 440 440 440
Making capacity (amps) 238 384 560 910
Breaking capacity (amps)
220/230V		 170 320 400 650
Breaking capacity (amps)
380/400V		 170 320 400 650
Breaking capacity (amps)
500V		 170 320 400 650
Breaking capacity (amps)
660/690V		 120 180 250 370
Short-circuit protection rating maximum fuse (amps)
Type 2 coordination(2)
400V; gG/gL 500V 25 63 63 125
690V; gG/gL 690V 25 35 50 80
Type 1 coordination(2)
400V; gG/gL 500V 63 125 125 250
690V; gG/gL 690V 50 63 80 100
Degree of protection   IP00 IP00 IP00 IP00
Protection against
direct contact when
actuated from
front (IEC 536)		 Finger and
back-of-hand
proof		 Finger and
back-of-hand
proof		 Finger and
back-of-hand
proof		 Finger and
back-of-hand
proof
Terminal capacity main cable—screw terminals
Solid (mm2) 1 x (0.75–16)
2 x (0.75–10)		 1 x (0.75–16)
2 x (0.75–10)		 1 x (0.75–16)
2 x (0.75–10)		 1 x (0.75–16)
2 x (0.75–10)
Flexible with
ferrule (mm2)		 1 x (0.75–16)
2 x (0.75–10)		 1 x (0.75–16)
2 x (0.75–10)		 1 x (2.5–35)
2 x (2.5–25)		 1 x (2.5–35)
2 x (2.5–25)
Stranded (mm2) 1 x 16 1 x 16 1 x (16–50)
2 x (16–35)		 1 x (16–50)
2 x (16–35)
Solid or stranded (AWG) 18–6 18–6 12–2 12–2
Flat conductor
(number of segments x
width x thickness) (mm)		 — — 2 x (6 x 9 x 0.8) 2 x (6 x 9 x 0.8)
Main cable connection
screw/bolt		 M5 M5 M6 M6
Tightening torque
Nm		 3 3 3.3 3.3
Tightening torque
Lb-in   		26.6 26.6 29.2 29.2
Terminal capacity controlcircuit cable—screw terminals
Solid (mm2) 1 x (0.75–4)
2 x (0.75–4)		 1 x (0.75–4)
2 x (0.75–4)		 1 x (0.75–4)
2 x (0.75–4)		 1 x (0.75–4)
2 x (0.75–4)
Flexible with ferrule
(mm2)		 1 x (0.75–2.5)
2 x (0.75–2.5)		 1 x (0.75–2.5)
2 x (0.75–2.5)		 1 x (0.75–2.5)
2 x (0.75–2.5)
 1 x (0.75–2.5)
2 x (0.75–2.5)
Solid or stranded (AWG) 18–14 18–14 18–14 18–14
Control circuit cable
connection screw/bolt		 M3.5 M3.5 M3.5  M3.5
Tightening torque
Nm 		1.2 1.2 1.2 1.2
Tightening torque
Lb-in		 10.6 10.6 10.6 10.6
Tools
Main and control
circuit cable -
screw terminals		 Size 2 Size 2 Size 2 Size 2
Pozidriv screwdriver 0.8 x 5.5  0.8 x 5.5  0.8 x 5.5 0.8 x 5.5
Standard screwdriver 1 x 6 1 x 6 1 x 6 1 x 6
Terminal capacity control circuit cable—spring cage terminals
Solid (mm2)
 1 x (0.75–2.5)
2 x (0.75–2.5)		 1 x (0.75–2.5)
2 x (0.75–2.5)		 1 x (0.75–2.5)
2 x (0.75–2.5)		 1 x (0.75–2.5)
2 x (0.75–2.5)
Flexible (mm2)
 1 x (0.75–2.5)
2 x (0.75–2.5)		 1 x (0.75–2.5)
2 x (0.75–2.5)
 1 x (0.75–2.5)
2 x (0.75–2.5)		 1 x (0.75–2.5)
2 x (0.75–2.5)
Flexible with ferrule (mm2)
 1 x (0.75–2.5)
2 x (0.75–2.5)		 1 x (0.75–2.5)
2 x (0.75–2.5)		 1 x (0.75–2.5)
2 x (0.75–2.5)		 1 x (0.75–2.5)
2 x (0.75–2.5)
Solid or stranded (AWG) 18–14 18–14 18–14 18–14
Tools
Main and control
circuit cable—spring cage terminals
Stripping length (mm)    		10 10 10 10
Screwdriver blade width (mm) 3.5 3.5 3.5 3.5
Mounting position,
AC and DC operated		 Mounting Positions - Size 0 - CN13BN010_ Mounting Positions - Size 1C - CN13CN010_ Mounting Positions - Size 1 - CN13DN000_ Mounting Positions - Size 2 - CN13GN000_
Ambient temperature
Open		 –25 to 60°C
[–13 to 140°F]		 –25 to 60°C
[–13 to 140°F]		 –25 to 60°C
[–13 to 140°F]		 –25 to 60°C
[–13 to 140°F]
Ambient temperature
Enclosed		 –25 to 40°C
[–13 to 104°F]		 –25 to 40°C
[–13 to 104°F]		 –25 to 40°C
[–13 to 104°F]		 –25 to 40°C
[–13 to 104°F]
Ambient storage
temperature		 –40 to 80°C
[–40 to 176°F]		 –40 to 80°C
[–40 to 176°F]		 –40 to 80°C
[–40 to 176°F]		 –40 to 80°C
[–40 to 176°F]
Environmental - Mechanical shock resistance
(IEC/EN 60068-2-27)
Main contact -
NO Contact 		10 10 10 10
Auxiliary contact -
NO Contact   		7 7 7 7
Auxiliary contact -
NC Contact		 5 5 5 5
Overvoltage category/
pollution degree  		III/3 III/3  III/3 III/3

Electronic Overload Relays
Up to 1500A
Technical Data and Specifications
Description Specification
45 mm 55 mm 110 mm
Electrical Ratings Range Range  Range
Operating voltage (three-phase)
and frequency  		690 Vac (60/50 Hz) 690 Vac (60/50 Hz) 690 Vac (60/50 Hz)
FLA Range 0.33–1.65A
1–5A
4–20A
9–45A		 20–100A 28–140A (NEMA)
35–175A (IEC)
Use with Contactors
Space-Savings NEMA Size		 0, 1C 1, 2, 3 4
Trip Class 10A, 10, 20, 30
Selectable		 10A, 10, 20, 30
Selectable		 10A, 10, 20, 30
Selectable
Motor Protection
Thermal overload setting		 1.05 x FLA: does not trip
1.15 x FLA: overload trip		 1.05 x FLA: does not trip
1.15 x FLA: overload trip		 1.05 x FLA: does not trip
1.15 x FLA: overload trip
Phase loss  Fixed threshold 50% Fixed threshold 50% Fixed threshold 50%
Phase unbalance
(selectable: enable/disable)		 Fixed threshold 50% Fixed threshold 50% Fixed threshold 50%
Ground fault
(selectable: enable/disable)		 50% of FLA dial setting
>150% = 2 sec
>250% = 1 sec		 50% of FLA dial setting
>150% = 2 sec
>250% = 1 sec		 50% of FLA dial setting
>150% = 2 sec
>250% = 1 sec
Reset Manual/automatic Manual/automatic Manual/automatic
Trip status Orange flag Orange flag Orange flag
Mode LED One flash:
Overload operating
properly
Two flashes:
Current is above
FLA dial
setting—
pending trip		 One flash:
Overload operating
properly
Two flashes:
Current is above
FLA dial
setting—
pending trip		 One flash:
Overload operating
properly
Two flashes:
Current is above
FLA dial
setting—
pending trip
Remote reset Yes Yes Yes
Reset bar Yes Yes Yes
Communication
expansion module		 Yes Yes Yes
Communication adapter Yes Yes Yes
Load terminals
Terminal capacity		 12–10 AWG (4–6 mm2)
8–6 AWG (6–16 mm2)		 6–1 AWG (16–50 mm2) 8–4/0 AWG (10–95 mm2)
Load terminals
Tightening torque		 20–25 lb-in (2.3–2.8 Nm)
25–30 lb-in (2.8–3.4 Nm)		 25–30 lb-in (2.8–3.4 Nm) 124 lb-in (14 Nm)
Input, auxiliary contact
and remote reset terminals
Terminal capacity		 2 x (18–12) AWG 2 x (18–12) AWG 2 x (18–12) AWG
Input, auxiliary contact
and remote reset terminals
Tightening torque		 7–11 lb-in (0.8–1.2 Nm) 7–11 lb-in (0.8–1.2 Nm) 7–11 lb-in (0.8–1.2 Nm)
Voltages
Insulation voltage Ui
(three-phase) 		690 Vac 690 Vac  690 Vac
Insulation
voltage Ui (control) 		500 Vac  500 Vac 500 Vac
Rated impulse
withstand voltage 		6000 Vac 6000 Vac  6000 Vac
Overvoltage category/
pollution degree 		III/3 III/3 III/3
Auxiliary and Control Circuit Ratings
Conventional thermal
continuous current 		5A 5A 5A
Rated operational current
—IEC AC-15
Make contact (1800 VA)		  
120V 15A 15A 15A
240V 15A 15A 15A
415V 0.5A 0.5A  0.5A
500V 0.5A 0.5A 0.5A
Break contact (180 VA)  
120V 1.5A 1.5A 1.5A
240V 1.5A 1.5A 1.5A
415V 0.9A 0.9A 0.9A
500V 0.8A 0.8A 0.8A
IEC DC-13 (L/R F 15 ms1)  
0–250V 1.0A 1.0A 1.0A
Rated operational current
UL B600
Make contact (3600 VA)		  
120V 30A 30A 30A
240V 15A 15A 15A
480V 7.5A 7.5A 7.5A
600V 6A 6A 6A
Break contact (360 VA)  
120V 3A 3A 3A
240V 1.5A 1.5A 1.5A
480V 0.75A 0.75A 0.75A
600V 0.6A 0.6A 0.6A
R300—Vdc ratings (28 VA)  
0–120V 0.22A 0.22A 0.22A
250V 0.11A 0.11A 0.11A
Short-Circuit Rating without Welding
Maximum fuse   6A gG/gL 6A gG/gL 6A gG/gL
Environmental Ratings
Ambient temperature
(operating)		 –13° to 149°F
(–25° to 65°C) 		–13° to 149°F
(–25° to 65°C) 		–13° to 149°F
(–25° to 65°C)
Ambient temperature
(storage)		 –40° to 185°F
(–40° to 85°C)		  –40° to 185°F
(–40° to 85°C) 		–40° to 185°F
(–40° to 85°C)
Operating humidity
UL 991 (H3)		 5% to 95%
noncondensing 		5% to 95%
noncondensing 		5% to 95%
noncondensing
Altitude (no derating)
NEMA ICS1		 2000m 2000m 2000m
Shock
(IEC 600068-2-27)		 15g any direction 15g any direction 15g any direction
Vibration
(IEC 60068-2-6)		 3g any direction 3g any direction 3g any direction
Pollution degree per
IEC 60947-4-1		 3 for product (2 for pcb) 3 for product (2 for pcb) 3 for product (2 for pcb)
Ingress protection IP20 IP20 IP20
Protection against direct
contact when actuated from
front (IEC 536)		 Finger- and
back-of-hand proof		 Finger- and
back-of-hand proof		 Finger- and
back-of-hand proof
Mounting position  Any Any Any
Climatic proofing Damp heat,
constant to
IEC 60068-2-30		 Damp heat,
constant to
IEC 60068-2-30		 Damp heat,
constant to
IEC 60068-2-30
Electrical/EMC
Radiated emissions
IEC 60947-4-1-Table 15
EN 55011 (CISPIR 11)
Group 1, Class A, ISM
 30 MHz to
1000 MHz		 30 MHz to
1000 MHz		 30 MHz to
1000 MHz
Conducted emissions
IEC 60947-4-1-Table 14
EN 55011 (CISPIR 11)
Group 1; Class ISM		 0.15 MHz to
30 MHz 		0.15 MHz to
30 MHz		  0.15 MHz to
30 MHz
ESD immunity
IEC 60947-4-1		 ±8 kV air,
±6 kV contact		 ±8 kV air,
±6 kV contact		 ±8 kV air,
±6 kV contact
Radiated immunity
IEC 60947-4-1
IEC 61000-4-3		 10 V/m 80
MHz–1000 MHz
3 V/m from
1.4 to 2.7 GHz
80% amplitude
modulated
1 kHz sine wave		 10 V/m 80
MHz–1000 MHz
3 V/m from
1.4 to 2.7 GHz
80% amplitude
modulated
1 kHz sine wave		 10 V/m 80
MHz–1000 MHz
3 V/m from
1.4 to 2.7 GHz
80% amplitude
modulated
1 kHz sine wave
Conducted immunity
IEC 60947-4-1,
IEC 61000-4-6		 140 dub (10V rms)
150 kHz–100 MHz		 140 dub (10V rms)
150 kHz–100 MHz		 140 dub (10V rms)
150 kHz–100 MHz
Fast transient immunity
IEC 60947-4-1
IEC 61000-4-4		 ±4 kV using direct method
with accessory installed
in expansion bay
±2 kV using direct method		 ±4 kV using direct method
with accessory installed
in expansion bay
±2 kV using direct method		 ±4 kV using direct method
with accessory installed
in expansion bay
±2 kV using direct method
Surge immunity
IEC 60947-4-1
IEC 61000-4-5
a Class 4		 Three-phase power inputs:
±4 kV line-to-line (DM)
±4 kV line-to-ground (CM)		 Three-phase power inputs:
±4 kV line-to-line (DM)
±4 kV line-to-ground (CM)		 Three-phase power inputs:
±4 kV line-to-line (DM)
±4 kV line-to-ground (CM)
With accessory installed in expansion bay:
±2 kV line-to-line
(DM) –>1.2/50 us;
2 kV line-to-earth,
1 kV line-to-line
±4 kV line-to-ground (CM)		 With accessory installed in expansion bay:
±2 kV line-to-line
(DM) –>1.2/50 us;
2 kV line-to-earth,
1 kV line-to-line
±4 kV line-to-ground (CM)		 With accessory installed in expansion bay:
±2 kV line-to-line
(DM) –>1.2/50 us;
2 kV line-to-earth,
1 kV line-to-line
±4 kV line-to-ground (CM)
Power freq. magnetic field immunity
IEC 60947-4-1,
IEC 61000-4-8		 30 A/m, 50 Hz 30 A/m, 50 Hz 30 A/m, 50 Hz
Electromagnetic field
IEC 60947-4-1,
 IEC 61000-4-3		 10 V/m 10 V/m 10 V/m
Distortion IEEE 519  5% THD max.,
5th harmonic 3% max.		 5% THD max.,
5th harmonic 3% max. 		5% THD max.,
5th harmonic 3% max.
Electrostatic discharge (ESD)
IEC 61000-4-2,
EN 61131-2		 4 kV contact
8 kV air discharge		 4 kV contact
8 kV air discharge		 4 kV contact
8 kV air discharge
Electrical fast
transient (EFT)
IEC 61000-4-4,
EN 61131-2		 ±2 kV using
direct method 		±2 kV using
direct method 		±2 kV using
direct method
Surge immunity
IEC 61000-4-5,
EN 61131-2
 ±2 kV
line-to-ground (CM)		 ±2 kV
line-to-ground (CM)		 ±2 kV
line-to-ground (CM)

NEMA Sizes 1-2 Dimensions
AN13GN0A5E Dimensions

Let our expert sales staff guide you through finding the right products to fit your needs. CALL 866-595-9616.

© 2016 KMParts.com, Inc. All rights reserved.