Menu

Eaton A200 Series - NEMA Contactors, Starters, Relays & Shoe Breakes

Eaton A200 Series Family Photo

Motor Ratings Data

Ampere Rating of AC and DC Motors

Ampere ratings of motors vary somewhat, depending upon the type of motor. The values given below are for drip-proof, Class B insulated
(T Frame) where available, 1.15 service factor, NEMA Design B motors. These values represent an average full load motor current which was calculated from the motor performance data published by several motor manufacturers. In the case of high torque squirrel cage motors, the ampere ratings will be at least 10% greater than the values given in the following table.

Caution—These average ratings could be high or low for a specific motor and therefore heater coil selection on this basis always involves risk. For fully reliable motor protection, select heater coils on the basis of full load current rating as shown on the motor nameplate.

Ampere Ratings of Three-Phase, 60 Hz, AC Induction Motor

hp Syn. Speed
RPM		 Current in Amperes
200V 230V 380V (1) 460V 575V 2200V
1/4 1800 1.09 0.95 0.55 0.48 0.38 -
1200 1.61 1.40 0.81 0.70 0.56 -
900 1.84 1.60 0.93 0.80 0.64 -
1/3 1800 1.37 1.19 0.69 0.60 0.48 -
1200 1.83 1.59 0.92 0.80 0.64 -
900 2.07 1.80 1.04 0.90 0.72 -
1/2 1800 1.98 1.72 0.99 0.86 0.69 -
1200 2.47 2.15 1.24 1.08 0.86 -
900 2.74 2.38 1.38 1.19 0.95 -
3/4 1800 2.83 2.46 1.42 1.23 0.98 -
1200 3.36 2.92 1.69 1.46 1.17 -
900 3.75 3.26 1.88 1.63 1.30 -
1 3600 3.22 2.80 1.70 1.40 1.12 -
1800 4.09 3.56 2.06 1.78 1.42 -
1200 4.32 3.76 2.28 1.88 1.50 -
900 4.95 4.30 2.60 2.15 1.72 -
1-1/2 3600 5.01 4.36 2.64 2.18 1.74 -
1800 5.59 4.86 2.94 2.43 1.94 -
1200 6.07 5.28 3.20 2.64 2.11 -
900 6.44 5.60 3.39 2.80 2.24 -
2 3600 6.44 5.60 3.39 2.80 2.24 -
1800 7.36 6.40 3.87 3.20 2.56 -
1200 7.87 6.84 4.14 3.42 2.74 -
900 9.09 7.90 4.77 3.95 3.16 -
3 3600 9.59 8.34 5.02 4.17 3.34 -
1800 10.8 9.40 5.70 4.70 3.76 -
1200 11.7 10.2 6.20 5.12 4.10 -
900 13.1 11.4 6.90 5.70 4.55 -
5 3600 15.5 13.5 8.20 6.76 5.41 -
1800 16.6 14.4 8.74 7.21 5.78 -
1200 18.2 15.8 9.59 7.91 6.32 -
900 18.3 15.9 9.60 7.92 6.33 -
7-1/2 3600 22.4 19.5 11.8 9.79 7.81 -
1800 24.7 21.5 13.0 10.7 8.55 -
1200 25.1 21.8 13.2 10.9 8.70 -
900 26.5 23.0 13.9 11.5 9.19 -
10 3600 29.2 25.4 15.4 12.7 10.1 -
1800 30.8 26.8 16.3 13.4 10.7 -
1200 32.2 28.0 16.9 14.0 11.2 -
900 35.1 30.5 18.5 15.2 12.2 -
15 3600 41.9 36.4 22.0 18.2 14.5 -
1800 45.1 39.2 23.7 19.6 15.7 -
1200 47.6 41.4 25.0 20.7 16.5 -
900 51.2 44.5 26.9 22.2 17.8 -
20 3600 58.0 50.4 30.5 25.2 20.1 -
1800 58.9 51.2 31.0 25.6 20.5 -
1200 60.7 52.8 31.9 26.4 21.1 -
900 63.1 54.9 33.2 27.4 21.9 -
25 3600 69.9 60.8 36.8 30.4 24.3 -
1800 74.5 64.8 39.2 32.4 25.9 -
1200 75.4 65.6 39.6 32.8 26.2 -
900 77.4 67.3 40.7 33.7 27.0 -
30 3600 84.8 73.7 44.4 36.8 29.4 -
1800 86.9 75.6 45.7 37.8 30.2 -
1200 90.6 78.8 47.6 39.4 31.5 -
900 94.1 81.8 49.5 40.9 32.7 -
40 3600 111 96.4 58.2 48.2 38.5 -
1800 116 101 61.0 50.4 40.3 -
1200 117 102 61.2 50.6 40.4 -
900 121 105 63.2 52.2 41.7 -
50 3600 138 120 72.9 60.1 48.2 -
1800 143 124 75.2 62.2 49.7 -
1200 145 126 76.2 63.0 50.4 -
900 150 130 78.5 65.0 52.0 -
60 3600 164 143 86.8 71.7 57.3 -
1800 171 140 90.0 74.5 59.4 -
1200 173 150 91.0 75.0 60.0 -
900 177 154 93.1 77.0 61.5 -
75 3600 206 179 108 89.6 71.7 -
1800 210 183 111 91.6 73.2 -
1200 212 184 112 92.0 73.5 -
900 222 193 117 96.5 77.5 -
100 3600 266 231 140 115 92.2 -
1800 271 236 144 118 94.8 23.6
1200 275 239 145 120 95.6 24.2
900 290 252 153 126 101 24.8
125 3600 - 292 176 146 116 -
1800 - 293 177 147 117 29.2
1200 - 298 180 149 119 29.9
900 - 305 186 153 122 30.9
150 3600 - 343 208 171 137 -
1800 - 348 210 174 139 34.8
1200 - 350 210 174 139 35.5
900 - 365 211 183 146 37.0
200 3600 - 452 257 226 181 -
1800 - 458 265 229 184 46.7
1200 - 460 266 230 184 47.0
900 - 482 279 241 193 49.4
250 3600 - 559 338 279 223 -
1800 - 568 343 284 227 57.5
1200 - 573 345 287 229 58.5
900 - 600 347 300 240 60.5
300 1800 - 678 392 339 271 69.0
1200 - 684 395 342 274 70.0
400 1800 - 896 518 448 358 91.8
500 1800 - 1110 642 555 444 116

Notes:

(1) 380V 50 Hz.

Single-Phase AC Motors

Ampere Rating of AC and DC Motors

The following values of fullload currents are for motors running at usual speeds and motors with normal torque characteristics. Motors built for especially low speeds or high torques may have higher full-load currents and multispeed motors will have full-load current varying with speed, in which case the nameplate current ratings shall be used.

The voltages listed are rated motor voltages. The currents listed shall be permitted for system voltage ranges of 110 to 120 and 220 to 240V.

Full-Load Currents in Amperes, Single-Phase Alternating- Current Motors

hp 115V 200V 208V 230V
1/6 4.4 2.5 2.4 2.2
1/4 5.8 3.3 3.2 2.9
1/3 7.2 4.1 4.0 3.6
1/2 9.8 5.6 5.4 4.9
3/4 13.8 7.9 7.6 6.9
1 16 9.2 8.8 8
1-1/2 20 11.5 11 10
2 24 13.8 13.2 12
3 34 19.6 18.7 17
5 56 32.2 30.8 28
7-1/2 80 46 44 40
10 100 57.5 55 50

Let our expert sales staff guide you through finding the right products to fit your needs. CALL 866-595-9616.

© 2013 KMParts.com, Inc. All rights reserved.