Eaton/Moeller |
PKE65/AK/XTU-65 shown |
PKE65/AK/XTU-65 |
|||
| Description | Setting Range Overload Release  |
Old Moeller Part Number |
New Eaton Part Number |
|---|---|---|---|
| Motor-protective circuit-breaker PKE with lockable handle |
16.0...65.0A | PKE65/AK/XTU-65 | XTPE065DCS |
PKE65/AK/XTU-65 Technical Data |
||
| General | ||
|---|---|---|
| Standards and regulations | — | IEC/EN 60947-4-1, VDE0660 UL 508, CSA C22.2 No.14 |
| Climatic proofing | — | Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
| Ambient temperature | Storage | -25…80°C |
| Open | -25…55°C | |
| Enclosed | -25…40°C | |
| Direction of incoming supply | — | any |
| Degree of protection | Device | IP20 |
| Terminals | IP00 | |
| Touch protection to EN50274 | — | Finger- and back-of-hand-proof |
| Mechanical shock resistance halfsinusoidal shock 10 ms to IEC 60068-2-27 |
— | 10 g on top-hat rail 15 g on mounting plate |
| Altitude | — | max. 2000m |
| Screw terminal conductor cross-section |
Solid | 1 x (0.75 – 16) mm(2) 1 x (0.75 – 16) mm(2) |
| Stranded with ferrule to DIN 46228 |
1 x (0.75 – 35) mm(2) 1 x (0.75 – 35) mm(2) |
|
| Solid or stranded | 14 – 2 AWG | |
| Main conductor | — | 3.3 Nm |
| Auxiliary conductor | — | 1 Nm |
| Main circuit | ||
| Rated impulse withstand voltage | Uimp | 6000 V AC |
| Overvoltage category / pollution degree | — | III/3 |
| Rated operational voltage | Ue | 690V |
| Rated uninterrupted current = rated output current |
Iu = Ie | 65A or setting value of the overcurrent release |
| Rated frequency | — | 40 – 60 Hz |
| Current heating losses (3-pole at operating temperature) |
— | 11W |
| Lifespan, mechanical | Operations | 0.05 x 106 |
| Lifespan, electrical (AC-3 at 400 V) | Operations | 0.05 x 106 |
| Maximum operating frequency | Operations/h | 60 ops./h |
| Motor switching capacity AC | AC-3 up to 690 V | 65A |
| Trip release | ||
| Temperature compensation |
— | -25…55 °C |
| — | -25…55 °C | |
| Temperature compensation residual error for T > 40°C |
— | — |
| Overload release setting range | — | 0.25 – 1 |
| Short-circuit release tolerance | — | + 20% |
| Single-phasing sensitivity | — | IEC/EN 60947-4-1, VDE 0660 part 102 |
PKE65/AK/XTU-65 Dimensions |
||
 |
||