Eaton |
A-PKZ0 shown |
XTPAXSR220VDC Shunt Release |
||||
| Description | Actuating Voltage |
For Use With | Old Moeller Part Number |
New Eaton Part Number |
|---|---|---|---|---|
| Shunt Release | 220 VDC | PKZM0 PKZM4 PKZM0-T PKM0 PKZM01 PKE |
A-PKZ0(220VDC) | XTPAXSR220VDC |
XTPAXSR220VDC Technical Data |
|
| General | |
|---|---|
| Moeller Part No. | A-PKZ0(220VDC) |
| Eaton Part No. | XTPAXSR220VDC |
| Delivery program | |
| Product range | Accessories |
| Accessories | Shunt release |
| Actuating voltage | 220 VDC |
| For use with | Shunt release PKZ0(4), PKE |
| Voltage type | Standard voltage |
| Current actuation | DC |
| Connection technique | Screw terminals |
| For use with | PKZM0 PKZM4 PKZM0-T PKM0 PKZM01 PKE |
| For PKE, only A-PKZ0 or U-PKZ0... with a serial number of 02 or higher can be retrofitted. |
|
| Notes: Can be fitted to the left of: Motor-protective circuit-breakers Cannot be combined with: U-PKZ0 undervoltage release DC: Intermittent operation 5 s |
|
| Technical data | |
| General | |
| Terminal capacities | |
| Solid or flexible conductor, with ferrule (mm2) |
1 x (0,75 - 2,5) 2 x (0,75 - 2,5) |
| Solid or stranded (AWG) | 1 x (18 - 14) 2 x (18 - 14) |
| Actuating voltage | 220 VDC |
| Operating range | |
| Alternating voltage | 0.7- 1.1 (x US) |
| DC Voltage (x US) | 0.7- 1.1 (x US) |
| Power consumption | |
| Pull-in power (Pick-up) | 5 VAC |
| Sealing power (Sealing) | 3 VAC |
| Design verification as per IEC/EN 61439 | |
| Technical data for design verification | |
| Static heat dissipation, non-current-dependent (Pvs) | 0.5 W |
| Heat dissipation capacity (Pdiss) | 0 W |
| IEC/EN 61439 design verification | |
| 10.2 Strength of materials and parts | |
| 10.2.2 Corrosion resistance | Meets the product standard's requirements. |
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements. |
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements. |
| 10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard's requirements. |
| 10.2.4 Resistance to ultra-violet (UV) radiation | Meets the product standard's requirements. |
| 10.2.5 Lifting | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2.6 Mechanical impact | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2.7 Inscriptions | Meets the product standard's requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.4 Clearances and creepage distances | Meets the product standard's requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility. |
| 10.8 Connections for external conductors | Is the panel builder's responsibility. |
| 10.9 Insulation properties | |
| 10.9.2 Power-frequency electric strength | Is the panel builder's responsibility. |
| 10.9.3 Impulse withstand voltage | Is the panel builder's responsibility. |
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility. |
| 10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.11 Short-circuit rating | Is the panel builder's responsibility. The specifications for the switchgear must be observed. |
| 10.12 Electromagnetic compatibility | Is the panel builder's responsibility. The specifications for the switchgear must be observed. |
| 10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Technical data ETIM 5.0 | |
| Low-voltage industrial components (EG000017) / Shunt release (for power circuit breaker) (EC001023) |
|
| Electric engineering, automation,
process control engineering / Low-voltage switch technology / Circuit breaker (LV < 1 kV) / Full load current trip (ecl@ss8-27-37-04-18 [AKF016009]) |
|
| Rated control supply voltage Us at AC 50HZ | 0 - 0 V |
| Rated control supply voltage Us at AC 60HZ | 0 - 0 V |
| Rated control supply voltage Us at DC | 220 - 220 V |
| Voltage type for actuating | AC |
| Initial value of the undelayed short-circuit release - setting range |
0 V |
| End value adjustment range undelayed short-circuit release |
0 V |
| Type of electric connection | Screw connection |
| Number of contacts as normally open contact | 0 |
| Number of contacts as normally closed contact | 0 |
| Number of contacts as change-over contact | 0 |
| Suitable for power circuit breaker | No |
| Suitable for switch disconnector | No |
| Suitable for motor safety switch | Yes |
| Suitable for overload relay | No |
| Approvals | |
| Product Standards | UL 508; CSA-C22.2 No. 14; IEC60947-4-1; CE marking |
| UL File No. | E36332 |
| UL Category Control No. | NLRV |
| CSA File No. | 165628 |
| CSA Class No. | 3211-05 |
| North America Certification | UL listed, CSA certified |
| Specially designed for North America | No |
XTPAXSR220VDC Dimensions |
||
 |
||