Eaton/Moeller A-PKZ0(24V50HZ) Shunt Release

A-PKZ0 shown

A-PKZ0(24V50HZ) Shunt Release
Description	Actuating Voltage	For Use With	Old Moeller Part Number	New Eaton Part Number
Shunt Release	24 V 50 Hz	PKZM0 PKZM4 PKZM0-T PKM0 PKZM01 PKE	A-PKZ0(24V50HZ)	XTPAXSR24V50H

A-PKZ0(24V50HZ) Technical Data
General
Moeller Part No.	A-PKZ0(24V50HZ)
Eaton Part No.	XTPAXSR24V50H
Delivery program
Product range	Accessories
Accessories	Shunt release
Actuating voltage	24 V 50 Hz
For use with	Shunt release PKZ0(4), PKE
Voltage type	Standard voltage
Current actuation	AC
Connection technique	Screw terminals
For use with	PKZM0 PKZM4 PKZM0-T PKM0 PKZM01 PKE
	For PKE, only A-PKZ0 or U-PKZ0... with a serial number of 02 or higher can be retrofitted.
Notes: Can be fitted to the left of: Motor-protective circuit-breakers Cannot be combined with: U-PKZ0 undervoltage release DC: Intermittent operation 5 s
Technical data
General
Terminal capacities
Solid or flexible conductor, with ferrule (mm2)	1 x (0,75 - 2,5) 2 x (0,75 - 2,5)
Solid or stranded (AWG)	1 x (18 - 14) 2 x (18 - 14)
Actuating voltage	24 V 50 Hz
Operating range
Alternating voltage	0.7- 1.1 (x US)
DC Voltage (x US)	0.7- 1.1 (x US)
Power consumption
Pull-in power (Pick-up)	5 VAC
Sealing power (Sealing)	3 VAC
Design verification as per IEC/EN 61439
Technical data for design verification
Static heat dissipation, non-current-dependent (Pvs)	0.5 W
Heat dissipation capacity (Pdiss)	0 W
IEC/EN 61439 design verification
10.2 Strength of materials and parts
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9 Insulation properties
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible  for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Technical data ETIM 5.0
Low-voltage industrial components (EG000017) / Shunt release (for power circuit breaker) (EC001023)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Circuit breaker (LV < 1 kV) / Full load current trip (ecl@ss8-27-37-04-18 [AKF016009])
Rated control supply voltage Us at AC 50HZ	24 - 24 V
Rated control supply voltage Us at AC 60HZ	0 - 0 V
Rated control supply voltage Us at DC	0 - 0 V
Voltage type for actuating	AC
Initial value of the undelayed short-circuit release - setting range	0 V
End value adjustment range undelayed short-circuit release	0 V
Type of electric connection	Screw connection
Number of contacts as normally open contact	0
Number of contacts as normally closed contact	0
Number of contacts as change-over contact	0
Suitable for power circuit breaker	No
Suitable for switch disconnector	No
Suitable for motor safety switch	Yes
Suitable for overload relay	No
Approvals
Product Standards	UL 508; CSA-C22.2 No. 14; IEC60947-4-1; CE marking
UL File No.	E36332
UL Category Control No.	NLRV
CSA File No.	165628
CSA Class No.	3211-05
North America Certification	UL listed, CSA certified
Specially designed for North America	No

A-PKZ0(24V50HZ) Dimensions

Inch to MM Conversion Convert to MM MM to Inch Conversion Convert to Inches