Moeller
DILR40/22 Auxiliary Contacts

The DILR40/22 is comprised of the DILR40 and a 22DIL The DILR40 is supplied without a front plate, HDIL00M, to facilitate mounting of auxiliary contact modules.
DILR40 Control Relay & 04DIL Auxiliary Contact
DILR40
	Contacts		IEC rated operational current at AC-15 220V, 230V, 240V	UL/CSA Pilot Duty Rating
	Normally Open	Normally Closed
	4	0	6	A 600 P 300
22DIL
	Contacts		IEC rated operational current at AC-15 220V, 230V, 240V	UL/CSA Pilot Duty Rating
	Normally Open	Normally Closed
	2	2	6	A 600 P 300
Contact Code Number: The contact code number provides useful information of the relay. It refers to the total number of N.O. contacts (1st digit) and N.C. contacts (2nd digit) found on the device. Adding both digits will result in the total number of contacts. Example: DILR40 + 04DIL = 4 N.O. + 4 N.C. contacts, for a total of eight contacts. Some contact combinations are preferred when used in configurations conforming to European Norms (EN Standards). These are denoted by the letter ” E” in the contact code number and are in accordance with DIN EN 50 011. All other combinations without the letter ” E” are in accordance with DIN EN 50 005. In the example above, the combination of DILR40 + 04DIL yields a relay with Type E configuration (44E).

MoellerDILR40/22 Auxiliary Contacts