When ordering the NZMH9, you will
need:
1) The full # off of the label (color may vary) example:
NZM9-250
2) The full # off the black label on the overload module
example: Zm9-200-obi
3) Any adjustment knobs settings if applicable.
NOTE:
State type, example: NZM9-250/ZM9A-250-NA
Optionally, select a substitute magnetic trip range and
insert the bold number into type number, example: NZM9-250/ZM9A-250-2000-NA
|
NZM9-xxx/ZM9-xxx-CNA and NZMH9-xxx/ZM9-xxx-CNA
disconnect switches are UL recognized (UL 508) and CSA
certified (C22.2 Nr. 14) 3-pole HP rated manual motor
disconnects with built-in thermal trips for motor
overload protection. An adjustable dial on the front of
the switch can be set to the motor
full load current.
NZM9-xxx/ZM9-xxx-CNA and NZMH9-xxx/ZM9-xxx-CNA
disconnect switches are CE marked and in conformity with
IEC/EN 60 947-2 (circuit breakers), which makes them
suitable internationally as inverse time molded case
circuit breakers with adjustable thermal and magnetic
trips.
NZMH9-250/ZM9A-200-2000-CNA has the line and load field
wiring terminals for cable connection supplied as
standard. The frame is rated at 250A. |
|
