NZM7 Accessories |
|
AUXILIARY CONTACTS |
|
| SWITCH |
TYPE ARTICLE NUMBER |
|
NHI STANDARD |
Normally Open
|
|
Normally Closed
|
|
|
VHI EARLY-MAKE |
|
|
RHI TRIP-INDICATING |
|
|
|
|
|
|
||
| Shunt trips are typically used to electrically trip the device from a remote location. The A...-NZM7 series is rated for 100% continuous duty. Shunt trips cannot be mounted together with undervoltage trips. | ||
| CIRCUIT BREAKER |
RATED ACTUATING VOLTAGE Universal AC/DC Maximum UL/CSA DC Voltage is 125 |
TYPE Article Number |
|
|
12 |
|
|
24 |
||
|
48 |
||
|
60 |
||
|
110-120 |
||
|
125-130 |
||
|
208-215 |
||
|
220-240 |
||
|
380-415 |
||
|
440-480 |
||
|
|
12 |
|
|
24 |
||
|
48 |
||
|
60 |
||
|
110-120 |
||
|
125-130 |
||
|
208-215 |
||
|
220-240 |
||
|
380-415 |
||
|
440-480 |
||
|
|
||
| Undervoltage trips will electrically trip the device open under power loss (when supply voltage drops below 35% - 70% of rated trip coil value) and can be used for control interlocking purposes, e.g. to disconnect the main switch in Emergency-stop circuits. They are rated for continuous duty. Undervoltage trips cannot be mounted together with shunt trips. | ||
| CIRCUIT BREAKER |
RATED ACTUATING VOLTAGE |
TYPE Article Number |
 UNDERVOLTAGE TRIP |
24 (AC) | |
| 48 (AC) | U-NZM7(48VAC) | |
| 60 (AC) | U-NZM7(60VAC) | |
| 110-120 (AC) | U-NZM7(110-120VAC) | |
| 125-130 (AC) | U-NZM7(125-130VAC) | |
| 208-215 (AC) | U-NZM7(208-215VAC) | |
| 220-240 (AC) | U-NZM7(220-240VAC) | |
| 380-415 (AC) | U-NZM7(380-415VAC) | |
| 440-480 (AC) | U-NZM7(440-480VAC) | |
| 24 (DC) | U-NZM7(24VDC) | |
| 48 (DC) | U-NZM7(48VDC) | |
| 60 (DC) | U-NZM7(60VDC) | |
| 110-120 (DC) | U-NZM7(110-120VDC) | |
| 125 (DC) | U-NZM7(125VDC) | |
|
UNDERVOLTAGE TRIP WITH EARLY MAKE AUXILIARY CONTACTS |
24 (AC) | |
| 48 (AC) | ||
| 60 (AC) | ||
| 110-120 (AC) | ||
| 125-130 (AC) | ||
| 208-215 (AC) | ||
| 220-240 (AC) | ||
| 380-415 (AC) | ||
| 440-480 (AC) | ||
| 24 (DC) | ||
| 48 (DC) | ||
| 60 (DC) | ||
| 110-120 (DC) | ||
| 125 (DC) | ||
|
|
||
|
Operates the NZM 7 circuit breaker or molded case switch electrically from a remote location. Switching times: ON 100ms, OFF 100ms. Local manual operation of the switch possible. 3 Wire control with automatic reset to the OFF position after the circuit breaker has tripped. |
||
|
RATED ACTUATING VOLTAGE |
TYPE Article Number |
|
| 110-120 (AC/DC) | ||
| 220-240 (AC/DC) | ||
| 24 (DC) | ||
| 48-60 (DC) | ||
|
|
||
|
ACCESSORY |
TYPE Article Number |
|
|
Insulating Frame (For door cutout) |
||
|
Rotary Drive Mechanism (Without padlocking feature) |
||
|
Rotary Drive Mechanism (With additional padlocking feature) |
||
|
Rotary Handle - Black (For open or panel-mounted switch) |
||
|
Black Handle (For cover/door interlocking) |
||
|
Red/Yellow Handle (For cover/door interlocking) |
||
|
Black Handle (Without padlocking feature) |
||
|
Extension Shaft 175-400mm |
||
|
Extension Shaft 260-600mm |
||
|
Side Wall Operator (Operation on the Left or Right) |
||
|
Mounting Bracket (For side panel mounting) |
||
|
Main Disconnect Switch Assembly Black (With door interlocking rotary handle) |
||
|
Main Disconnect Switch Assembly (Red/Yellow) (With door interlocking rotary handle)
|
||
|
Main Disconnect Switch Assembly (Black Operation on Left) |
|
|
|
Main Disconnect Switch Assembly (Black Operation on Right) |
|
|
|
Main Disconnect Switch Assembly (Red/Yellow - Operation on Left) |
|
|
|
Main Disconnect Switch Assembly (Red/Yellow - Operation on Right) |
|
|
|
External Warning Plate |
|
|
|
External Warning Plate (Blank) |
||
|
Mechanical Interlock |
|
|
|
Clip Plate |
|
|
|
Vertical Handle Assembly Kit 36" Cable Length |
|
|
|
Vertical Handle Assembly Kit 48" Cable Length |
|
|
|
|
||
|
ACCESSORY |
TYPE Article Number |
|
|
Terminal Kit
(3 Pole Switches -
|
Mounted on the TOP
|
|
|
Mounted on the BOTTOM
|
||
|
Terminal Kit
(3 Pole Switches - |
Mounted on the TOP
|
|
|
Mounted on the BOTTOM
|
||
|
Rear Terminal Bolts (For 3-pole Switches) |
Mounted on the TOP
|
|
|
Mounted on the BOTTOM
|
||
|
Control Circuit Tap-Off Terminals |
For circuit breakers and molded case switches with terminal connectors
|
|
|
For circuit breakers and molded case switches with bolt on connections terminals
|
||
|
Terminal Cover |
|
|
| NZM7 Molded Case Circuit Breaker with Fixed Thermal Setting | NZM7 Molded Case Circuit Breaker with Adjustable Thermal Setting Units | NZM7 Molded Case Switches | NZM7 Accessories |