Klockner Moeller
NZM10
Accessories

MD-NZM10

Mounting depth 250-285 mm

For manual ON-OFF switching of encapsulated NZM10 breakers and switched equipped with a remote control drive. Not for use in conjunction with KVR-NZM10 mechanical interlock

MDV-NZM10

Mounting depth 285-400 mm

RTR-NZM10

Transparent cover to provide a panel cutout area with IP54 protections. For use where the remote control drive protrudes from the cutout area of the enclosure door.

PL-NZM10

Blocks off manual switching access of the remote control drive at the device. Electrical switching from a remote location and manual tripping of the circuit breakers (push to trip feature) are not affected.

SVB-NZM10

Permits the OFF position of the toggle operator to be locked with up to 3 padlocks. Hasp thickness 6 - 8 mm.

RT-NZM10

For use where toggle witch protrudes from the enclosure.  Provides degree of protection IP 40. Affixed from the rear with screws. Can be inscribed.

D-NZM10

Converts ON and OFF switching from a vertical toggle movement to a rotary motion. Required for the use of rotary and door coupling/interlocking rotary handles.

Can be locked in the OFF position with up to 3 padlocks.

Hasp thickness 4 - 8 mm.

H10U-SW

Black color. Requires rotary drive mechanism. Suitable for open mount switches. No door interlocking or padlocking provisions.

A-NZM10

For mounting depths in range of 175-400 mm

A600-NZM10

For mounting depths in range of 260-600 mm

Can be cut to length

H10UZ

for A-NZM10

For panel mounted switches.

Push fits on to the extension shafts.

Used to actuate the device when the panel door is open.

H12UZ

for A600-NZM-10

H10-SW-NA

Black (standard)

With cover interlocking and padlocking feature, rotary drive mechanism required. Can be locked in the ON and OFF position with up to 3 padlocks. Degree of protection: UL/NEMA 3R, 12; IEC IP55  3 distinct handle positions:

OFF - + (tripped) - ON

RH10-NA

Red/Yellow (Emergency Stop)

SA-NZM10

Indicates position of switch (OFF, tripped or ON) when panel door is open.  To be mounted on shaft of rotary drive.

V-NZM10-SW

Black (standard)

(Kits for CE marked control panels per IEC/EN 60 204-1)

NZM10-...-NA breakers and switched have dual UL/CSA and IEC/EN ratings.  They are suitable for use as main disconnect switched in control panels that must be CE marked and designed to comply with Machinery Directive standard EN 60 204-1.

Kit Contains:

-Door coupling rotary handle

-Rotary drive mechanism

-Extension shaft for 400mm mounting depth

-External warning plate

-Black lightning symbol

V-NZM10

Red/Yellow (Emergency Stop)

ZS62-NZM10

English

Main switch - Open only in OFF position

Other languages are available.

ZS60-NZM10

Blank (can be engraved)

KV2-NZM10

for two circuit breakers

For mechanically interlocking two NZM10 circuit breakers or molded case switched mounted in a panel.  Fits toggle operators or rotary drive mechanisms. R-NZM10 must be electrically interlocked at the same time.

KVR2-NZM10

for two circuit breakers equipped with RNZM10 remote control drives

KV3-NZM10

for three circuit breakers

For mechanically interlocking three NZM10 circuit breakers or molded case switched mounted in a panel.  Fits toggle operators or rotary drive mechanisms.

KVA3-NZM10

for two circuit breakers with
one emergency supply breakers

SH-36-4X-NZM10

36" cable length

Each kit includes:

-Flange mounted vertical handle

-A flexible cable

-Mechanical linkage operator

SH-48-4X-NZM10

48" cable length

H-NZM10

Suitable for cable lug terminals

Supplied as standard with K2 x 240 (IP)

Supplied as 1 terminal cover

HH-NZM10

One Piece, 3 pole terminal cover

Suitable for K300 and K2 x 120

Return to NZM10

Legacy Circuit Breakers