Klockner Moeller
NZM10
Molded Case
Disconnect Switch Index

These switches are virtually identical in construction to the NZM10 molded case circuit breakers except that they are manual, non-automatic switches without any overload or over current protective features.  They are equally rates up to 600A.  All molded-case switches are UL listed (UL 489) and CSA certified (C22.2 Nr. 5.2), in conformity with IEC/EN 60 947-3 (switch disconnectors) and CE marked.

Molded case Switches are tested to determine their acceptability for continuous operation at their marked rated load.  In addition, they are tested at six times their full ampere rating to cover motor circuit applications and are suitable for use as motor circuit disconnects per NEC section 430-109 and CEC section 28-602.

TYPE

ARTICLE NUMBER

MOLDED CASE SWITCHES

n Supplied with a toggle operator.  Refer to --- table for additional handle types.

n Supplied standard with bolt on connection.  For load and line field wiring terminals for cable connection, refer to ---table for available terminals.

NZM10-400 N/B-NA

NZM10-600 N/B-NA