HMCP150T4C Motor Circuit Protection (MCP)

F-Frame — 600 Vac Maximum, 250 Vdc Maximum
NEMA Starter Size	Continuous Amps	Cam Setting	Motor Full Load Current Amperes (FLA)(1)	MCP Trip Setting(2)
4	150	A	34.6–46.0	450
		B	46.1–57.5	600
		C	57.6–69.1	750
		D	69.2–80.6	900
		E	80.7–92.2	1050
		F	92.3–103.7	1200
		G	103.8–115.2	1350
		H	115.3–126.7	1500

NOTES:
(1) Motor FLA ranges are typical. The corresponding trip setting is at 13 x the minimum FLA value shown. Where a 13 x setting is required for an intermediate FLA value, alternate Cam settings and/or MCP ratings should be used.

(2) For DC applications, actual trip levels are approximately 40% higher than values shown.

All GMCP 3–63A come with line and load steel body terminals for Cu only wire.

UL recognized and CSA approved