HMCP050K2C Motor Circuit Protection (MCP)

F-Frame — 600 Vac Maximum, 250 Vdc Maximum
NEMA Starter Size	Continuous Amps	Cam Setting	Motor Full Load Current Amperes (FLA)(1)	MCP Trip Setting(2)
2	50	A	11.5–15.2	150
		B	15.3–19.1	200
		C	19.2–22.9	250
		D	23.0–26.8	300
		E	26.9–30.6	350
		F	30.7–4.5	400
		G	34.6–38.3	450
		H	38.4–42.1	500

NOTES:
(1) Motor FLA ranges are typical. The corresponding trip setting is at 13 x the minimum FLA value shown. Where a 13 x setting is required for an intermediate FLA value, alternate Cam settings and/or MCP ratings should be used.

(2) For DC applications, actual trip levels are approximately 40% higher than values shown.

All GMCP 3–63A come with line and load steel body terminals for Cu only wire.

UL recognized and CSA approved