HMCP030H1C Motor Circuit Protection (MCP)

F-Frame — 600 Vac Maximum, 250 Vdc Maximum
NEMA Starter Size	Continuous Amps	Cam Setting	Motor Full Load Current Amperes (FLA)(1)	MCP Trip Setting(2)
1	30	A	6.9–9.1	90
		B	9.2–11.4	120
		C	11.5–13.7	150
		D	13.8–16.0	180
		E	16.1–18.3	210
		F	18.4–20.6	240
		G	20.7–22.9	270
		H	23.0–25.2	300

NOTES:
(1) Motor FLA ranges are typical. The corresponding trip setting is at 13 x the minimum FLA value shown. Where a 13 x setting is required for an intermediate FLA value, alternate Cam settings and/or MCP ratings should be used.

(2) For DC applications, actual trip levels are approximately 40% higher than values shown.

All GMCP 3–63A come with line and load steel body terminals for Cu only wire.

UL recognized and CSA approved