HMCP070M2C Motor Circuit Protection (MCP)

F-Frame — 600 Vac Maximum, 250 Vdc Maximum
NEMA Starter Size	Continuous Amps	Cam Setting	Motor Full Load Current Amperes (FLA)(1)	MCP Trip Setting(2)
2	70	A	16.1–21.4	210
		B	21.5 –26.8	280
		C	26.9 –32.2	350
		D	32.3–37.5	420
		E	37.6–42.9	490
		F	43.0–48.3	560
		G	48.4–53.7	630
		H	53.8–59.1	700

NOTES:
(1) Motor FLA ranges are typical. The corresponding trip setting is at 13 x the minimum FLA value shown. Where a 13 x setting is required for an intermediate FLA value, alternate Cam settings and/or MCP ratings should be used.

(2) For DC applications, actual trip levels are approximately 40% higher than values shown.

All GMCP 3–63A come with line and load steel body terminals for Cu only wire.

UL recognized and CSA approved